IOM SYSAQUA 45 125 (IOM AQA 05 N 3GB)

English
1/4
Access
Services
Commissioning
Status
Main Menu
1/4
Access
Services
Commissioning
Status
Main Menu
1/13
0.0%
0.0%
44°C
44°C
8.0°C
8.0°C
HMI
Schedul.
Automatic
Delegate
heaters
Circuit 1
Hydraulic circuit
Capacity
Load
Current setp. heat
Heating setp.
Current setp. cool
Cooling setp.
State from
Mode from
HMI state
HMI mode
Status
1/13
0.0%
0.0%
44°C
44°C
8.0°C
8.0°C
HMI
Schedul.
Automatic
Delegate
heaters
Circuit 1
Hydraulic circuit
Capacity
Load
Current setp. heat
Heating setp.
Current setp. cool
Cooling setp.
State from
Mode from
HMI state
HMI mode
Status
1/5
Limited capacity
Reduced
On
Off
Delegate
HMI state
18.0°C4.0°C
8.0°C
55.0°C20.0°C
44.0°C
1/4
Access
Services
Commissioning
Status
Main Menu
1/4
Access
Services
Commissioning
Status
Main Menu
1/13
0.0%
0.0%
44°C
44°C
8.0°C
8.0°C
HMI
Schedul.
Automatic
Delegate
heaters
Circuit 1
Hydraulic circuit
Capacity
Load
Current setp. heat
Heating setp.
Current setp. cool
Cooling setp.
State from
Mode from
HMI state
HMI mode
Status
1/13
0.0%
0.0%
44°C
44°C
8.0°C
8.0°C
HMI
Schedul.
Automatic
Delegate
heaters
Circuit 1
Hydraulic circuit
Capacity
Load
Current setp. heat
Heating setp.
Current setp. cool
Cooling setp.
State from
Mode from
HMI state
HMI mode
Status
1/13
0.0%
0.0%
44°C
44°C
8.0°C
8.0°C
HMI
Schedul.
Automatic
Delegate
heaters
Circuit 1
Hydraulic circuit
Capacity
Load
Current setp. heat
Heating setp.
Current setp. cool
Cooling setp.
State from
Mode from
HMI state
HMI mode
Status
1/13
0.0%
0.0%
44°C
44°C
8.0°C
8.0°C
HMI
Schedul.
Automatic
Delegate
heaters
Circuit 1
Hydraulic circuit
Capacity
Load
Current setp. heat
Heating setp.
Current setp. cool
Cooling setp.
State from
Mode from
HMI state
HMI mode
Status
1/13
0.0%
0.0%
44°C
44°C
8.0°C
8.0°C
HMI
Schedul.
Automatic
Delegate
heaters
Circuit 1
Hydraulic circuit
Capacity
Load
Current setp. heat
Heating setp.
Current setp. cool
Cooling setp.
State from
Mode from
HMI state
HMI mode
Status
1/13
0.0%
0.0%
44°C
44°C
8.0°C
8.0°C
HMI
Schedul.
Automatic
Delegate
heaters
Circuit 1
Hydraulic circuit
Capacity
Load
Current setp. heat
Heating setp.
Current setp. cool
Cooling setp.
State from
Mode from
HMI state
HMI mode
Status
28 SYSAQUA
13.4.4. SELECTING THE OPERATING MODE
13.4.5. USER TEMPERATURE SETPOINTS AND ACTUAL SETPOINTS
To launch the unit, the user must select the desired mode in the menu:
² Delegate : the current mode is
determined by the BMS or by
default by the calendar (refer to
the user manual)
² Off : Unit is stopped
² On : System is launched
² Reduced : Refer to the § REDUCED MODE, page 33
² Limited capacity : Refer to the § LIMITED CAPACITY, page 33
In the Status menu, the user can set
start or return temperature setpoints,
according to the control mode selected:
² Cooling setp : temperature setpoint
for the cool mode
² Heating setp : temperature setpoint for the heat mode
These setpoints are xed and restricted to the unit's operating limits.
They can however be adjusted with the "Water law" and "Reduced mode" options,
which are deactivated by default.
Regardless of the adjustment, the resulting setpoint is restricted to the operating
limits to protect the unit.
Actual heat and cooling setpoints correspond to values used in real time, account taken of any adjustments
and protections.
The "State from" line states which element requested the current status :
² Cont.off : on/off digital input
² Cont.ext : D2 congurable digital input (in "Reduced mode" or "Limited
capacity"
² HMI: User interface
² BMS
² Schedul