SYSCROLL 20 30 AIR EVO HP – Tender Specification
Table Of Contents
- Tender Specification
- USERIESU: SyScroll 20-30 Air EVO HP
- UTYPEU: Air to water inverter driven heat pump
- UTECHNOLOGYU: scroll compressor / inverter driven
- UCAPACITY RANGEU:
- Cooling ( 20-35 [kW]
- Heating ( 20-34 [kW]
- 1. General description
- 2. Key points
- 3. Cabinet
- 4. Compressors
- 5. Evaporator
- 6. Air cooled condenser coil
- 7. Condenser fans
- 8. Refrigerant circuit
- 9. Hydraulic circuit
- 10. Control panel
- 11. Safety and control devices
- 12. Standard equipment
- Field-installed accessories
- Conformity with standards
Tender Specification
SyScroll 20-30 Air EVO HP
2. Key points
• Wide load variation capability
o Cooling operation down to 30 % and up to 140% of nom.
capacity
o Heating operation down to 40% and up to 130% of nom.
capacity
• Great accuracy in maintaining desired set-point
• Unit optimization for heating operation both for fan coil and floor
application
• Excellent efficiency performances both at full and partial load
• Wide operating limits in heating mode:
o Min outdoor ambient temperature -15 [°C]
o Max leaving water temperature 55 [°C]
• Simple refrigerant circuit with easy access to inner components for
maintenance purpose
• Aeraulic independence between refrigerant circuit and condensing side
• New fan motors (Erp 2015 compliant) with integrated grill, nozzle and
condensers
• Several options / accessories provided with standard delivery:
o Multistage centrifugal pump easy hydraulic installation
o Fan speed control cooling operation with low OAT / heating
operation with high OAT
o Electronic expansion valve precision in SH control
o ModBus interface supervision ready
o Phase sequence control algorithm safe electric installation
o Stepless capacity control precision in water set-point control