IMO FRQ5S 4A 10A 16A V2
Table Of Contents
- 1 General notes
- 2 Safety instructions
- 2.1 Intended use
- 2.2 Explanations of symbols
- 2.3 Product safety
- 2.3 Product safety
- 2.4 Requirements placed on the personnel / due diligence
- 2.4 Requirements placed on the personnel / due diligence
- 2.5 Start–up and during operation
- 2.5 Start–up and during operation
- 2.6 Working on device / Hazards through
- 2.7 Modifications / interventions in the device
- 2.8 Operator’s obligation of diligence
- 2.9 Employment of external personnel
- 3 Product overview
- 4 Mounting
- 5 Electrical installation
- 5.1 Safety precautions
- 5.2 EMC–compatible installation
- 5.3 Mains connection
- 5.4 Residual–current–operated protective device
- 5.5 Inverter output
- 5.6 Motor protection
- 5.7 Voltage supply for external devices (+, GND)
- 5.8 Enable, Device ON / OFF (Digital In 1 =D1)
- 5.9 Relay outputs
- 5.10 Bypass circuit
- 5.11 Potential at control voltage connections
- 6 Start–up
- 7 Diagnostics / Faults
- 8 Enclosure
5.2.3 Harmonics current for devices ≤ 16 A . . . . . . . . . . . . . . . 12
5.3 Mains connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.3.1 Line voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.3.2 Required quality attributes for the mains voltage . . . . . . . . . 13
5.3.3 Leakage current, securely attached, protective earth conductor
13
5.4 Residual-current-operated protective device . . . . . . . . . . . . . . . . 13
5.5 Inverter output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.5.1 Motor connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.5.2 Disconnection between controller and motor (repair switch) 13
5.5.3 U/f-characteristic curve . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.6 Motor protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.7 Voltage supply for external devices (+24V, GND) . . . . . . . . . . . . 16
5.8 Enable, Device ON / OFF (Digital In 1 = D1) . . . . . . . . . . . . . . . 16
5.9 Relay outputs (K1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.10 Bypass circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.11 Potential at control voltage connections . . . . . . . . . . . . . . . . . . . 16
6 Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.1 Prerequisites for commissioning . . . . . . . . . . . . . . . . . . . . . . . . . 17
7 Diagnostics / Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8 Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.1 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.1.1 Max. load dependent on ambient temperature and line voltage.
23
8.2 Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8.2.1 Connection suggestion for several motors with motor protection
unit type STDT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
8.3 Dimensions [mm] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
8.4 Manufacturer reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Operating Instructions FRQ5S-4/10/16A
L-BAL-E197-GB 1445 Index 002 Part.-No. 00163411-42
3/26