IMO FRQ5S 4A 10A 16A V2
Table Of Contents
- 1 General notes
- 2 Safety instructions
- 2.1 Intended use
- 2.2 Explanations of symbols
- 2.3 Product safety
- 2.3 Product safety
- 2.4 Requirements placed on the personnel / due diligence
- 2.4 Requirements placed on the personnel / due diligence
- 2.5 Start–up and during operation
- 2.5 Start–up and during operation
- 2.6 Working on device / Hazards through
- 2.7 Modifications / interventions in the device
- 2.8 Operator’s obligation of diligence
- 2.9 Employment of external personnel
- 3 Product overview
- 4 Mounting
- 5 Electrical installation
- 5.1 Safety precautions
- 5.2 EMC–compatible installation
- 5.3 Mains connection
- 5.4 Residual–current–operated protective device
- 5.5 Inverter output
- 5.6 Motor protection
- 5.7 Voltage supply for external devices (+, GND)
- 5.8 Enable, Device ON / OFF (Digital In 1 =D1)
- 5.9 Relay outputs
- 5.10 Bypass circuit
- 5.11 Potential at control voltage connections
- 6 Start–up
- 7 Diagnostics / Faults
- 8 Enclosure
8.4 Manufacturer reference
Our products are manufactured in accordance with the relevant international regulations.
If you have any questions concerning the use of our products or plan special uses,
please contact:
Systemair
Industrievägen 3
73930 Skinnskatteberg
Telefon:+46 (0) 222 440 00
Telefax:+46 (0) 222 440 99
mailbox@systemair.se
www.systemair.se
Operating Instructions FRQ5S-4/10/16A Enclosure
L-BAL-E197-GB 1445 Index 002 Part.-No. 00163411-42
26/26