MA FRICO COMPETENT QUICKGUIDE GB 171113

SIRe Competent
27
GB
Support menu
The support menu is password protected and
is used for support in contact with Frico or
authorised installer.
General settings
Language, time, date, function test, manual
system check and factory reset.
Alarm and error codes
Current settings
Current set values.
Temperature settings
Day/night temperature. The night
temperature is only valid when the week
program is activated.
System on/off
Safety features are still active when the
system is switched off.
Installer menu
Password 1932
Installer status screen
Current settings and functions.
Week program
Activate week program, check, change, add or
erase program.
Fan settings
Fan control and over run functions.
Main menu
Complete manual see www.frico.se
Reset alarm
Note! Before resetting, check that the fault is rectified
and there is nothing to prevent the unit from being
recommissioned.
Press and select reset alarm.
At the first start up alarm and error codes
can occur, these will usually be reset without
actions.
Power failure
Note! A power loss longer than 7 days may
require an adjustment of time and date.
The week program is affected if the clock is
not correctly set.
Fan control
Maximum fan speed and fan speed when the
door is closed. Fan speed when the door is
closed is only valid when using SIReAC.
Filter guard settings
Activate filter timer and set service interval.
External control (BMS)
External on/off, fan control 0-10V. See
"Connecting external control".
Heating settings
Set point difference open door, (calibrating
sensors).
Summer/Winter
Summer - heat off
Fan heaters