INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION K KV PRIO006

ManualsBrandsSystemair ManualsCircular inline duct fansK 200 EC sileo <125W - Centrifugal circular duct fan

Table Of Contents

4 Installation

4.1 To do before the installation

of the product

• Make sure that you have the necessary installation

accessories:

– Refer to 13 Accessory overview page 30 for an over-

view of the accessories.

– If you install the product outdoors, it is necessary to in-

stall a weather protection roof.

– To decrease vibrations transmitted from the product to

the duct system, Systemair recommends to install vi-

bration dampers, fast clamps or flexible connections.

– If you install the product with free suction or free dis-

charge, it is necessary to install a protection grille.

Make sure that the safety distance agrees with the

standard DIN EN ISO 13857 and the standard DIN

24167–1.

• Use installation material with fire resistance rating for the

installation location.

• Examine the packaging for transportation damage and re-

move the packaging from the product carefully.

• Examine the product and all components for damage.

• Make sure that the motor effect and the fan performance

agrees with the expectations at the installation location.

• Make sure that the information on the name plate and the

motor name plate agrees with the operation conditions.

• Install the product in a location where there is space for

commissioning, troubleshooting and maintenance.

• Make sure that the installation location is clean and dry,

for full safety during electrical work.

• Make sure that the installation surface has sufficient ca-

pacity to hold the weight of the product.

• Refer to the airflow direction arrows on the name plate or

on the product to install the product in the correct position.

• Make sure that all cable glands are tight against the ca-

bles to prevent leaks.

4.2 To install the K fans

The product can be installed in any position, on wall or ceiling

using the mounting bracket which is included at delivery. Re-

fer to 4.2.1 To install the mounting bracket for K fans page 5

for K fans. The product can also be installed in the ceiling us-

ing pendulum bars or wires. Pendulum bars, wires and nuts

are not supplied by Systemair.

1 Install the mounting bracket or the pendulum bars to the

product casing. Refer to 4.2.1 To install the mounting

bracket for K fans page 5.

2 Attach the product to the wall or the ceiling with the 2

supplied screws.

4.2.1 To install the mounting bracket for K fans