Modbus Registers OPTIMA...GOMOD

Short instruction 227VM-024-05-MB
Written by: Michael Köhle Date: 13.11.2014 08:56:00 Side 2 of 13
1. Cover
The cover shows the appropriate units and if diagnostic functions are set. Also there is the
3-digit display (function see 1.1.3) to show selected functions, values and units. The units
are printed on the sticker.
On the cover of the actuator there are two selectors the value selector (1) and the function
selector (2).
(1)
(2)
Differential pres-
sure Sensor
(3)
(4)
1.1.1. Value selector (∆10° / Edit)
The value selector allows the changing of values. The position of the arrow shows the value
set. The changes are displayed as soon as the selector is moved ±10° from its position. By
turning the selector up or down the corresponding values are shown. For change V
nom
one
can select the appropriate thousand separators.