TRVS15 25 Johnson Controls

PB_VG3000_03 2020
10
Technical Specications VG3000
Compression Fitting
Models VG3290xx VG3490xx
Body Type 2-way
PDTC (NO)
3-way mixing/diverting
with built-in by-pass
Body Rating PN16 Nominal, maximum rated pressure
Inherent Flow Characteristic Linear
Service Water, glycol solutions (max 50%) for HVAC applications.
Fluid Group 1 according Regulation (EC) No 1272/2008
(proper water treatment is recommended, refer to VDI 2035)
Body Size DN10
Max Pressure drop ∆p 70 kPa
Kv
s
and max. close-off pressure See “Ordering Code and Dimensions” on page 2
Body Connection Compression fitting (EN1254-2)
Nominal Stroke 4.0 mm
Connection to Actuator M30 x 1.5
Materials
Body: EN12165 CW617 Brass CuZn40Pb2
Trim: Stem: AISI 303 stainless steel (X10CrNiS1809)
Spring: AISI 302 stainless steel (X10CrNi1809)
Plug: EPDM
Leakage Max 0,01% of K
VS
, Class IV for ANSI FCI 70-2 and EN60534-4 modif. 1
Fluid Temperature Limits 2...110 °C
Ambient Temperature Limits 2...50 °C
Max weight packaging excluded 200 g 350 g
Compliance Johnson Controls declares that these products are in compliance with the essential
requirements and other relevant provisions of the PED (Pressure Equipment Directive)
2014/68/EU (Paragraph 4.3).
CE marking is not applicable.
ROHS (2011/65/EU) when connected with an actuator.