Dep cas SEE Read all instructions before using (this appliance). DANGER To reduce the rig of electric shock: 1) Always unplug this appliance from the electrical outlet immediately after using and ‘before cleaning. ‘WARNING To reduce the risk of burns, fire, electric shock, or injury to persons: 1) An appliance should never be left unattended when plugged in. Unplug from outlet ‘when not in use, and before putting on or taking off parts. 2) Do not operate under blanket or pillow.
Cor R arise es Safety Precautions Before using, please read the SAFETY PRECAUTIONS carefully to ensure correct operation of this appliance. Best Circumstances Proclamations and warnings listed below will help to ensure proper operation of this appliance. W The classes of accidents mused by incorrect use are classified into WARNING ind CAUTION Read all WARNINGS and CAUTIONS below snd follow all instrumentation within this manual # Do not use this appliance where temperature is over 40°C.
NAME AND ENUNCIATION OF EACH COMPONENT External Structure Seat cushion Internal Structure Side sit bag Leg heat Power Box 7) Pinching sensor a Do Power Switch with Indicator Light nd Fuse Power Socket A CAUTION » Children should be supervised to ensure that they do not play with the chair or touch the power box. » Always unplug the massage chair from the electrical outlet immediately after use| » Unplug from outlet during thunder or lightening storms, and before putting on or taking off parts.
NAME AND ENUNCIATION OF EACH COMPONENT Controller POD Relax Bleep Controller Instructions Power On/Off » Press this button to power on and recline the massage chair to massage position,you may choose the desired program to enjoy a massage;press this ‘button again to turn off and restore the massage chair. Massage chair will be powered off automatically if there is no operation for 3 ‘minutes in standby mode.
NAME AND ENUNCIATION OF EACH COMPONENT ZG Cycle » A full body kneading,tapping and shiatsu massage at Zero Gravity position. Backrest Down » Press and hold to recline the backrest to the desired angle. Manual > Pros this button to focus the massage to the current point, you may cycle through kneading tapping, kneading and tapping manual massage techniques.
PEEL BINARY CHECKS Surrounding Environment Do not use the massage chair in high moisture environment such as near swimming pool or bathroom to prevent electric shock accident. Please peck the massage chair away from heated surfaces to prevent fire ‘hazard or damage to the product. Grounding This product must be grounded, the plug must be plugged into an appropriate 3.
PEEL BINARY CHECKS Moving the Massage Chair » Roll the chair on its casters to the desired location, » Incline the backrest to upright position. » Turn off the power switch and unplug the appliance from the electrical outlet. » Using two people,push down on the backrest and Lift up on the front side by grabbing the moving Holder located to the front bottom of the armrest), roll the chair on its casters to the desired location(check the sketch for reference).
CARE AND MAINTENANCE Care Instructions PT treat stains on back pans] armrest leg rest plastic parts or air hose, spot loan with mild detergent foam, then wipe it with a dry cleaning cloth, »To treat stains on controller; power box spot clean with dry cleaning cloth. PTo treat stains on back cushion or pillowcase a water-based upholstery loaner only; wipe it with moist cloth, then air dry, PTo clean the legroom unit controversy it from the chair hand wash with a mild detergent, then line dry.
18 iE el cae Ee Name: Massage Chair Model: MR360 Rated voltage: 100-240~ Rated Rated power: 140W Safety design: Class 1 Technical Description ‘This product is working under 433.99MEz frequency aud scope of work is as follows: 433.99MHz “This product is 3 V lithium battery power supply, working through 20 button working mode. ‘The main parts as follows: 1. Lithium battery (CR2032) 2. RF module (BC48R2020) 3. Crystal (13.56MHz) This device complies with Part 15 of the FCC Rules.