Specification

SCOT
®
/Metering
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]
Copyright © 2016 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-1554 REV 0 ■ 032316
Model Numbers
Metering Lavatory Faucet
Specification Submittal
SLS-7000 Series
Metering lavatory faucet features single hole mount,
3/8" copper supply tubes, adjustable flow time and
0.25 gpc (0.95 L/cyl) at 0.5 gpm (1.9 L/min) vandal resistant
aerator. Faucet constructed from brass, plated in standard
polished chrome nish.
Specification
Location:
Modifications
Note: Append appropriate -sufx to model number.

SLS-7000
SCOT Metering Lavatory Faucet
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Compliance
-ASME A112.18.1/CSA B125.1
-NSF/ANSI 61.9, NSF/ANSI 372
Dimensions
Measurements
A Ø 1-5/8", 41 mm
B 4-3/4", 121 mm
C
Deck Thickness Ref.
Min. 5/8", 16 mm
Max. 1-1/8", 29 mm
D
Hole Size
Min. Ø 7/8", 22 mm
E 11", 279 mm
F 5-3/8", 137 mm
G 2-1/16", 52
H
Ø 2", 51 mm
I
3/8", 10 mm
Note: Dimensions subject to change without notice.
FF
AA
BB
EE
CC
DD
GG
HH
II

-BH Braided hose

-C Cold marking on cap in place of standard cap

-DP 8" deck plate

-DP4 4" deck plate

-G Grid drain

-H Hot marking on cap in place of standard cap

-ML Maxline for temperature selection

-MV Mechanical mixing valve for temperature
selection

-OFG Offset grid strainer

-QC Quick close cartridge

-STE 8" supply tube extensions with
compression couplings