Installation Guide

For ADA compliance (Americans with Disabilities Act) consult ADAAG or your state reg-
ulations for proper product choice and mounting heights. ADAAG does permit a fixed
shower head mounted 48” above the floor in unmonitored facilities where vandalism
may be a problem.
Recommended head heights
Men ____________________________ 6’0”
Boys, Senior High _________________ 5’10”
Boys, Junior High _________________ 5’7”
Boys, Elementary _________________ 5’4”
Women _________________________ 5’8”
Girls, Senior High _________________ 5’8”
Girls, Junior High _________________ 5’5”
Girls, Elementary __________________ 4’2”
INSTALLATION:
1. Install riser into valve body and
head bracket.
2. Install elbows to water supplies
and attach to unions and valve
body.
3. Mount valve body and head
bracket to the wall.
1-410 Series
1-510 Series
INSTALLATION INSTRUCTIONS
Product meets ANSI A112.18.1M
Flow rate: 2.5 gpm (9.5 L/min)
1-410
20”
508mm
1-510
18 ¾”
476mm
Safetymix®