User's Manual

1
FINAL.Not for distribution.
Introduction
The AP 300 Access Port, a component of the Symbol Wireless Switch
System, links wireless 802.11a/b/g devices to the switch, enabling
incremental growth of your wireless network with a cost-effective
alternative to standard access points. For optimal performance, the AP
300 provides two placement options: wall and ceiling. Wall mount slots
fit onto two screws provided; marks on the AP 300 case guide placement
of the screws. Clips on the back of the case fit onto a suspended ceiling
T-bar.
The AP 300 receives all power and transfers data through the same
CAT-5 cable without any strain relief. There is no additional power
supply.
Technical Specifications
Dimensions & Weight
Operating Voltage 48VDC typical; 36-57VDC
range
Power Over Ethernet
Operating Current 10mA to 165mA
Peak Current 250mA
Operating
Temperature
-20°C to 50°C (-4°F to 122°F)
Operating Humidity 5% to 95% non-condensing
Storage Temperature -40°C to 70°C (-40°F to
158°F)
Storage Humidity 85%
Altitude 2438m (8,000ft.) maximum operating
4572m (15,000ft.) maximum storage
Drop 91cm (36in.) to concrete Without antenna modules
Electrostatic
Discharge
+/-15kV air; +/-8kV contact;
+/-2kV pin
Length 21.1cm (8.31in)
Width 17.1cm (6.74in.)
Height 5.1cm (2.0in.)
Weight 0.45kg (1.0lbs)