User's Manual

 59
Figure 4-8 BTExplorer Settings - Device Info Tab
1. Before bonding a new device, make sure to turn on Bluetooth.
2. If you want other devices to find your FR6076, please tick “Make this device visible to other devices”.
COM Ports Tab
Use the COM Ports tab set specific outgoing ports for bonded devices.
1. Tap New Outgoing Port.
Figure 4-9 Add COM Ports
2. Select the device you want to add. Then tap Next.
Figure 4-10 Select device
3. Select a port from drop-down list. Then tap Finish.