T5214.QX3 01.2.21 6:56 PM Page 1 OWNER’S MANUAL 13-INCH COLOR TV/VCR SRC2113 This Owner’s Manual is made of recycled paper. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
T5214.QX3 01.2.21 6:56 PM Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
T5214.QX3 01.2.21 6:56 PM Page 3 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
T5214.QX3 01.2.21 6:56 PM Page 4 PRECAUTIONS LOCATION For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit.
T5214.QX3 01.2.21 6:56 PM Page 5 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .6 C OPERATING CONTROLS AND FUNCTIONS 7 C PREPARATION FOR USE . . . . . . . . . . . . . . . .9 ANTENNA/CABLE CONNECTIONS . . . . . . .9 EXTERNAL INPUT MODE . . . . . . . . . . . . . .10 INSTALLING THE BATTERIES . . . . . . . . .
T5214.QX3 01.2.21 6:56 PM Page 6 FEATURES • Infrared remote control • Bilingual on screen menu display selectable in • • Zero Return–The tape returns to counter of 0:00:00 by rewinding or fast forwarding. • Still–“Freeze” the picture at any time, for close English or Spanish Real time counter–This shows the elapsed record- ing or playback time in hours, minutes, and seconds. The “–” indication will appear when the tape is rewound further than the tape counter position “0:00:00”.
T5214.QX3 01.2.21 6:56 PM Page 7 OPERATING CONTROLS AND FUNCTIONS - TV/VCR FRONT PANEL - AUDIO VIDEO STOP EJECT REW PLAY F.FWD REC OTR CHANNEL VOLUME POWER 11 12 13 EARPHONE 1 2 3 4 5 6 7 8 9 10 - REMOTE CONTROL - 25 WAKE-UP /SLEEP POWER 13 15 16 17 5 CHANNEL RETURN 1 2 3 4 5 6 7 8 9 0 +100 MENU DISPLAY MUTE CHANNEL 19 20 VOLUME PLAY REW F.FWD 4 24 11 12 23 6 7 STOP 4 8 18 EJECT RECORD T-PROG.
T5214.QX3 01.2.21 6:56 PM Page 8 - REAR VIEW - ANT. 26 27 7 F.FWD button– Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search) B button– When setting program (for example: setting clock • or timer program), press to determine your selection and proceed to the next step you want to input. • Press to determine setting modes from on screen menu. • Press to select a mode from a particular menu.
T5214.QX3 01.2.21 6:56 PM Page 9 PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS Satellite Box or Cable Box (Not supplied) From Cable System or Satellite Dish OUT VHF/UHF Antenna (Not supplied) Rod Antenna (Supplied) IN VHF Antenna (Not supplied) From Cable System UHF Antenna (Not supplied) or ANT. VHF/UHF or Combiner (Not supplied) or 75-ohm Coaxial Cable (Not supplied) ANT.
T5214.QX3 01.2.21 6:56 PM Page 10 TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1) Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Example: CH3) 2) Select the channel to record from your Cable Converter Box or Satellite Box. EXTERNAL INPUT MODE INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
T5214.QX3 01.2.21 6:56 PM Page 11 1 TO SELECT A DESIRED CHANNEL You can select the desired channel by using the CHANNEL K or L button or directly pressing the number buttons on the remote control. Note for using the number buttons: • When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digts. (Example: to select channel 125, first press the +100 button then press “2” and “5”). • You must proceed single-digit channel numbers with a zero (Example: 02 .
T5214.QX3 01.2.21 6:56 PM Page 12 1 Select “SETTING CLOCK” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”. Then, press the F.FWD/B button. 2 Select “MANUAL CLOCK SET” Press the PLAY/K or STOP/L button to point to “MANUAL CLOCK SET”. Then, press the F.FWD/B button. 3 Select the month Press the PLAY/K or STOP/L button until your desired month appears. (Example: May → 05) Then, press the F.FWD/B button.
T5214.QX3 01.2.21 6:56 PM Page 13 1 2 Select “ADD/DELETE CH” Press the PLAY/K or STOP/L button to point to “ADD/DELETE CH”. Press the F.FWD/B button. 3 TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK B CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH 3 NOTE: If for some reason the menu is in Spanish, press the MENU button on the remote control, press the PLAY/K button to point to “IDIOMA [ESPAÑOL]”, then press the F.
T5214.QX3 01.2.21 6:56 PM Page 14 TV OPERATION WATCHING A TV PROGRAM 1 PICTURE CONTROL Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
T5214.QX3 01.2.21 6:56 PM Page 15 TO CANCEL THE CLOSED CAPTION SYSTEM CLOSED CAPTION SYSTEM You can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, you can watch half screen text information if you want.
T5214.QX3 01.2.21 6:56 PM Page 16 3 4 Select your desired item Press the PLAY/K or STOP/L button to point to your desired item. Then, press the F.FWD/B button to select [BLOCK] or [VIEW]. B TV–Y TV–Y7 ( TV–G TV–PG ( TV–14 ( TV–MA ( ) ) ) ) [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] MPAA RATING SET UP • When you select the rating category and turn it • Exit the V-Chip setting mode Press the MENU button on the remote control to return to original mode.
T5214.QX3 01.2.21 6:56 PM Page 17 PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE AUTO REPEAT PLAYBACK Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.
T5214.QX3 01.2.21 6:56 PM Page 18 SEARCH PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button during playback (in the SP / LP / SLP modes). 2)Press it again and the TV/VCR will now search in super high speed (in the LP / SLP modes only).
T5214.QX3 01.2.21 6:56 PM Page 19 NOISE CANCEL (in the Still mode) This feature allows you to reposition or reduce the noise lines of a still picture. Press the PAUSE/STILL button so that the noise lines change position on the screen so you can see the picture in its entirety without distracting noise lines. NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode.
T5214.QX3 01.2.21 6:56 PM Page 20 Make sure ... • TV/VCR power is turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING OTR (One Touch Recording) You can ONLY watch the same TV program that is being recorded.
T5214.QX3 01.2.21 6:56 PM Page 21 3 Begin OTR Avoid overlap of programs ... There is a chance that a program will not be recorded. When programs overlap: • The program with the earliest start time will record first. • Once the earliest program finishes recording, the overlapping programs will record in the order of the program number. • The illustration below demonstrates the sequence of recording. OTR(2 : 30) Press the REC/OTR button on the TV/VCR as many times as needed.
T5214.QX3 01.2.21 6:56 PM Page 22 the same time on the same channel every day. (Example: Monday through Sunday) Press the STOP/L (down) button until “EVRY DAY” appears. Then, press the F.FWD/B button.
T5214.QX3 01.2.21 6:56 PM Page 23 TO CANCEL AN AUTOMATIC TIMER RECORDING 2 • After setting a program; • 1)Press the POWER button. 2)Repeat steps [1] ~ [2] under TIMER RECORDING, page 21, and select a program you want to cancel. 3)Press the T-PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. While recording is in progress; 1)Press POWER button. 2)Press the STOP/EJECT button on the TV/VCR.
T5214.QX3 01.2.21 6:56 PM Page 24 2 SLEEP TIMER Select “TV” or “TAPE” Press the PLAY/K or STOP/L button until it points to “TV/TAPE”. Press the F.FWD/B or REW/s button, and select [TV] or [TAPE]. 3 WAKE UP ON/OFF TIMER B TV/TAPE TIME [ON] [TV] [12:00AM] The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time. NOTE: • This function does not operate during Recording mode.
T5214.QX3 01.2.21 6:56 PM Page 25 ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: WHEN THE CLOSED CAPTION MODE IS OFF: • Counter mode: After 5 seconds, only • the counter remains. To clear it, press the DISPLAY button. Clock mode: After 5 seconds, only the clock and the channel number remain.
T5214.QX3 01.2.21 6:56 PM Page 26 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM No power. No picture and sound. No picture or poor picture on TV/VCR. No sound or poor sound. Timer recording is not possible. Cannot go into Record mode. Playback picture is partially noisy.
T5214.QX3 01.2.21 6:56 PM Page 27 SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS CRT : Video input level : Audio input level : Video S/N ratio : Audio S/N ratio : 13 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary two-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec.
T5214ES.QX3 01.2.21 6:57 PM Page 28 INDICE CONTROLES DE OPERACIÓN Y SUS FUNCIONES . . . . . . . . . . . . . . . . . . . . . . . .28 INSTALACIÓN DE LAS PILAS . . . . . . . . . . . . .30 CONEXIONES DE ANTENA/CABLE . . . . . . . .30 PREPARACIÓN DE CANALES POR PRIMERA VEZ . . . . . . . . . . . . . . . . . . . . . . . . . .31 MODO DE ENTRADA EXTERNA . . . . . . . . . . .30 AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . . . .
T5214ES.QX3 01.2.21 6:57 PM Page 29 - PANEL TRASERO ANT. 26 27 6 Botón de reproducción (PLAY)– Púlselo para iniciar la reproducción. Botón K– Púlselo para seleccionar los modos de ajuste desde el • menúde la pantalla. • Púlselo para introducir dígitos cuando establezca un programa. (Por ejemplo: Para ajustar el reloj o establecer un programa de temporizador) 7 Botón de avance rápido (F.FWD)– Púlselo para avanzar rápidamente la cinta, o para ver la imagen en avance rápido durante el modo de reproducción.
T5214ES.QX3 01.2.21 6:57 PM Page 30 CONEXIONES DE ANTENA/CABLE Caja de CATV o caja de emisiones vía satélite (no incluído) OUT Desde el cable coaxial o caja de emisiones vía satélite de 75 ohm del sistema de Cable Antena de varilla UHF/VHF (incluído) Antena combinada de VHF/UHF (no incluído) IN Antena VHF (no incluído) Desde el sistema de Cable Antena UHF (no incluído) o ANT. Combinador de o VHF/UHF (no incluído) ANT.
T5214ES.QX3 01.2.21 6:57 PM Page 31 PREPARACIÓN DE CANALES POR PRIMERA VEZ AJUSTE DEL RELOJ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA estándar. NOTA: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación. 2) Pulse el botón POWER para encender el televisor/videograbadora. 3) Seleccione “ENGLISH” o “ESPAÑOL” utilizando el botón F.FWD/B o REW/s. “[ ]” indica el idioma seleccionado.
T5214BCV.QX3 01.2.21 6:58 PM Page 32 LIMITED WARRANTY FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP.
