OWNER’S MANUAL COLOR TV/VCR 63134C (13 inch) 63194C (19 inch) This Owner’s Manual is made of recycled paper. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
PRECAUTIONS LOCATION For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .6 C OPERATING CONTROLS AND FUNCTIONS 7 C PREPARATION FOR USE . . . . . . . . . . . . . . . .9 ANTENNA/CABLE CONNECTIONS . . . . . . .9 EXTERNAL INPUT MODE . . . . . . . . . . . . . .10 INSTALLING THE BATTERIES . . . . . . . . . . .10 C SET UP FOR USE . . . . .
FEATURES • Rotary 4-head Record/Playback System–Four • • • • • heads ensure excellent picture quality and special effects playback. Index Search–Fast-forwards to start of next recording. Slow Motion–View recorded program at slower than normal speed. Infrared remote control Bilingual on screen menu display selectable in English or Spanish Real time counter–This shows the elapsed record- • • • heads as you insert or remove a cassette.
OPERATING CONTROLS AND FUNCTIONS This manual covers 13" and 19". The operation of the two models are exactly the same except the appearance. 19" model is illustrated in this manual. - TV/VCR FRONT PANEL - VIDEO AUDIO POWER VOLUME STOP/EJECT CHANNEL REW PLAY F.FWD REC/OTR EARPHONE 1 2 3 4 5 6 7 8 9101112 13 14 - REMOTE CONTROL - 25 WAKE-UP /SLEEP POWER 3 15 16 17 8 CHANNEL RETURN 1 2 3 4 5 6 7 8 9 0 +100 MENU DISPLAY MUTE CHANNEL 19 20 VOLUME PLAY REW F.
- REAR VIEW -* ANT. 27 9 PLAY button– Press to begin playback. K button– • Press to select setting modes from the on screen menu. • Press to enter digits when setting program. (for example: setting clock or timer program) 10 F.FWD button– Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode.
PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS Satellite Box or OUT Cable Box (Not supplied) From Cable System or Satellite Dish Rod Antenna (Supplied with 13” model only) IN VHF/UHF Antenna (Not supplied) VHF Antenna (Not supplied) From Cable System UHF Antenna (Not supplied) or VHF/UHF or Combiner (Not supplied) or 75-ohm Coaxial Cable (Not supplied) ANT.
TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1) Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Example: CH3) 2) Select the channel to record from your Cable Converter Box or Satellite Box. EXTERNAL INPUT MODE INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
1 TO SELECT A DESIRED CHANNEL You can select the desired channel by using the CHANNEL K or L button or directly pressing the number buttons on the remote control. Note for using the number buttons: • When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digits. (Example: to select channel 125, first press the +100 button then press “2” and “5”). • You must proceed single-digit channel numbers with a zero (Example: 02 ... 09).
1 Select “SETTING CLOCK” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”. Then, press the F.FWD/B button. 2 Select “MANUAL CLOCK SET” Press the PLAY/K or STOP/L button to point to “MANUAL CLOCK SET”. Then, press the F.FWD/B button. 3 Select the month Press the PLAY/K or STOP/L button until your desired month appears. (Example: May → 05) Then, press the F.FWD/B button.
1 2 Select “ADD/DELETE CH” Press the PLAY/K or STOP/L button to point to “ADD/DELETE CH”. Press the F.FWD/B button. 3 TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK B CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 3 NOTE: If for some reason the menu is in Spanish, press the MENU button on the remote control, press the PLAY/K button to point to “IDIOMA [ESPAÑOL]”, then press the F.
TV OPERATION WATCHING A TV PROGRAM 1 PICTURE CONTROL Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
TO CANCEL THE CLOSED CAPTION SYSTEM CLOSED CAPTION SYSTEM You can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, you can watch half screen text information if you want. 1-2: You may get these captions or text information by selecting either “1” or “2”.
3 4 Select your desired item Press the PLAY/K or STOP/L button to point to your desired item. Then, press the F.FWD/B button to select [BLOCK] or [VIEW]. B TV–Y TV–Y7 ( TV–G TV–PG ( TV–14 ( TV–MA ( ) ) ) ) [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] MPAA RATING SET UP • When you select the rating category and turn it • [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.
PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE NORMAL PLAYBACK Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on. Make sure ... • TV/VCR power must be turned on.
AUTO REPEAT PLAYBACK SEARCH The TV/VCR has an auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the beginning to a blank part of more than 10 seconds. 1 Select “USER’S SET UP” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “USER’S SET UP”. Then, press the F.FWD/B button.
TIME SEARCH 3)Press the F.FWD/B or REW/s button to start index search. If you want to go forward, press the F.FWD/B button. If you want to go back, press the REW/s button. • After index search, the TV/VCR will play the tape automatically. • In some cases, the index mark at the beginning of video tape cannot be detected. The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.
VERTICAL HOLD CONTROL TRACKING ADJUSTMENT In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL K or L button. NOTE: If there are video noise lines on the screen, see Tracking Adjustment section. STILL PICTURE You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines.
OTR (One Touch Recording) This function enables you to set the recording length simply by pressing the REC/OTR button on the VCR. 1)Begin OTR by pressing the REC/OTR button on the VCR repeatedly until the desired recording length appears. Recording stops when 0:00 is reached. NOTES: • This function CANNOT be done from the remote control. • To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control.
For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) – TIMER PROGRAMMING – CH DATE 10 BEGIN END - - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:B 61 EVRY DAY -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- - -:- -:- -:- -:- -:- -:- -:- -:- - - - Press the STOP/L (down) button until “EVRY DAY” appears. Then, press the F.FWD/B button.
TO CANCEL AN AUTOMATIC TIMER RECORDING 2 • After setting a program; • 1)Press the POWER button. 2)Repeat steps [1] ~ [2] under TIMER RECORDING, page 21, and select a program you want to cancel. 3)Press the T-PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. While recording is in progress; 1)Press POWER button. 2)Press the STOP/EJECT button on the TV/VCR. TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off.
2 SLEEP TIMER Select “TV” or “TAPE” Press the PLAY/K or STOP/L button until it points to “TV/TAPE”. Press the F.FWD/B or REW/s button, and select [TV] or [TAPE]. 3 WAKE UP ON/OFF TIMER B TV/TAPE TIME [ON] [TV] [12:00AM] The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time. NOTE: • This function does not operate during Recording mode. Set wake up time 1 Press the PLAY/K or STOP/L button until it points to “TIME”. Press the F.
ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: WHEN THE CLOSED CAPTION MODE IS OFF: • Counter mode: After 5 seconds, only • the counter remains. To clear it, press the DISPLAY button. Clock mode: After 5 seconds, only the clock and the channel number remain.
TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM No power. No picture and sound. No picture or poor picture on TV/VCR. No sound or poor sound. Timer recording is not possible. Cannot go into Record mode. Playback picture is partially noisy. No picture but the audio is OK in playback.
SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS CRT : Video input level : Audio input level : Video S/N ratio : Audio S/N ratio : 13 or 19 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec.
INDICE CONTROLES DE OPERACIÓN Y SUS FUNCIONES . . . . . . . . . . . . . . . . . . . . . . . .28 INSTALACIÓN DE LAS PILAS . . . . . . . . . . . . .31 CONEXIONES DE ANTENA/CABLE . . . . . . . .30 PREPARACIÓN DE CANALES POR PRIMERA VEZ . . . . . . . . . . . . . . . . . . . . . . . . . .31 MODO DE ENTRADA EXTERNA . . . . . . . . . . .31 AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . . . .31 CONTROLES DE OPERACIÓN Y SUS FUNCIONES Este manual sirve para los modelos de 13" y 19".
- PANEL TRASERO - ANT. 27 8 Botón de rebobinado (REW)– Púlselo para rebobinar la cinta, o para ver la imagen en retroceso rápido durante el modo de reproducción. (Búsqueda con rebobinado) Botón s– • Púlselo para seleccionar un modo desde un menúparticular. (Por ejemplo: IDIOMA o ADJUST DE USER) 9 Botón de reproducción (PLAY)– Púlselo para iniciar la reproducción. Botón K– • Púlselo para seleccionar los modos de ajuste desde el menúde la pantalla.
CONEXIONES DE ANTENA/CABLE Caja de CATV o caja de emisiones vía satélite OUT (no incluído) Desde el cable coaxial o caja de emisiones vía satélite de 75 ohm del sistema de Cable IN Antena de varilla UHF/VHF (incluído para solamente 13”) Antena combinada de VHF/UHF (no incluído) Antena VHF (no incluído) Desde el sistema de Cable o Antena UHF (no incluído) Combinador de o VHF/UHF (no incluído) ANT.
MODO DE ENTRADA EXTERNA AJUSTE DEL RELOJ Cuando utilice una señal de entrada externa (otra videograbadora o una videocámara), conecte los cables de salida de audio/vídeo del equipo de reproducción a las tomas AUDIO IN/VIDEO IN de su televisor/videograbadora. Y luego pulse el botón CHANNEL K o L hasta que “AUX” aparezca en la pantalla. Usted puede programar el temporizador para que explore todos los canales que puedan recibirse en su zona. Cerciórese...
LIMITED WARRANTY FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP.
