Manual

The channels you no longer receive or seldom watch can
be deleted from the memory. (Of course, you can later
add the deleted channel into the memory again.)
• Be sure to check that the POWER and the VCR/TV
indicators are both on.
• Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on
the back of the VCR to match the channel [Sackof
selected on the TV. theVCR]
Press the MENU button until the
main menu appears.
MENO 1
TIMEn PnO'SRA_IN6
AUTO R_PEAT 0+_1
PlCTURESELEC
CHANNELSETUP
CLOCK SET
LAV'3OAGESELECT
Press the PLAY/A or STOP/Y button to point to "CHAN-
NEL SET UP". Then, press the EFWD,9,- button.
_ -[ec I_ANtJA_ S_ i bP
Press the PLAY/& or STOP/Y but-
ton to point to "MANUAL SET UP".
Then, press the E.EWD/II_ button.
f ¢HANN_LSETUp
AUTOSETUp
MANUALSETUP
NOTE: To confirm that channel(s) has been deleted or
added, press the CHANNEL'& or • button.
Remember: If your cable box or satellite box is con-
nected as in Fig 4 on page I I or Fig 5 on
page 12, you DO NOT have to set up the
channels. Just select the TV and VCR to
channel 3 or 4 and also have the
CH3/CH4 switch on the back of the VCR
to match the channel you selected (CH 3
or CH 4). Now select the Box to the chan-
nel you wish to view or record.
I) Press the MENU button until the main menu appears.
2) Press the PLAY/A or STOP/V button to point to
"CHANNEL SET UP". Then, press the F.FWDt_. but-
ton.
¢
3) Confirm "AUTO SET UP" is / ............
pointed to, then press the [" _'_'[_
F.FWDAID"button. After scan-
ning, the tuner stops at the low-
est memorized channel.
• The VCR distinguishes between standard TV chan-
nels and cable channels.
Press the number buttons or the
PLAY/A or STOP/V button until
your desired channel number ap-
pears, (Example: CH30)
UANOALSETUP
@CANNEL20 TV
¢t%
_7 D -lore it from memo W
Press the EFWD/I_ or REW(IND)/<I button so that
"DELETE" flashes on the TV screen.
• To delete another channel, repeat steps [4] and [5].
• If you press the F.FWD/II_ or REW(IND)/<I button
again, the channel is memorized again.
]
I)
2)
If you want to change the language on the TV screen,
follow the steps below:
Note: This function effects only the language on the
screen menu and not the audio source.
3)
Press the MENU button until the main menu appears.
Press the PLAY/& or STOP/• button to point to
"LANGUAGE SELECT". Then, press the
F.FW D/I_ button.
L^t,_3t_,GE SELECT
Select "ENGLISH" or .- _,_,_. _
"ESPAIqOL"= Spanish using .......
the PLAY/A or STOP/• but-
ton,
I _ANUAUSErU p
¢HAN_EL 30 CTV]
_EtEt_
DELETED -
•..,.._,_.,<_E,,,, 4) Press the RESET/EXIT but-
ton to return to TV mode.
NOTE: If tot some reason the menu is in Spanish, press
the MENU button until the main menu appears, press the
PLAY/_ button to point to "SELEC. IDIOMA", press the
- MEMORIZED - EFWD,'I_" button, press the PLAY/A button to point to
"ENGLISH", then press the RESET/EXIT button.
Press the RESET/EXIT button to return to TV mode.
- 16- EN
9JI4