Manual

Make sure ...
• TV/VCR power must be turned on.
1 Insert a prerecorded tape
If the erase-protection tab has been removed, the
TV/VCR will start playback automatically,.
2 To begin playback r _,v.
Press the PLAY button.
Note: If any menu is activated on
the screen, the PLAY button does
not function. Press the MENU but-
ton to clear the menu, then press the PLAY button.
3 To stop playback
Press the STOP button when playback is completed.
The TV/VCR has an auto repeat function that allows
PICTURE SEARCH
This feature is very useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the F.FWD or REW button during playback (in the
SP / LP 1 SUP modes). -
2)Press it again and the TV/VCR will now search in
super high speed (in the LP / SLP modes only).
NOTE: Tapes recorded in the SP or LP mode will
display a noise bar on the TV screen and the pic-
ture may revert to Black and White. This is normal.
3)Press the PLAY button to return to normal speed.
ZERO RETURN
youto repe_ a tape indefini_ly without _uching the
PLAY button.
ALL REPEAT:Repeat playback from the beginning
to the end of the tape.
BLANK REPEAT:Repeat playback from the begin-
ning to a blank part of more than 10 seconds.
1 Select "USER'S SET UP"
Press the MENU button on the
remote control.
Press the PLAY/A or STOP/_ but-
ton to point to "USER'S SET UP".
Then. press the EFWD/I_ button.
2 Select "ALL" or "BLANK"
Press the PLAY[& or STOPi_' but-
ton to point to "REPEAT PLAY".
Press the F.FWD/II_ or REW/<I
button repeatedly until your desired
selection [ALL ! or [BLANK] appears.
3 Exit the Repeat Play setting
-MENO- ]
I"_4ER _G
pICtURE CO_rm_.
_NG CLOCK
CK_NNI_L SET U_
• USEWS SET UP
TIME SEARC_
rNDEX
- L_ER'S SET UP - /
Press the MENU button on the remote control to
return to the "IV mode.
4 Start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY lip" appears.
• Once you select the Repeat Play mode, it stays in
effect even after you turn off the TVNCR.
• If the Rental mode is set [ON], the "RENTAL
PLAY I_" display has priority.
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the
EFWD/I_ or REW/_I button on the remote control.
Press the MENU button on the remote control to
returnto TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature. - 18 -
This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a
blank portion of a tape.
1 Stop a tape at your desired point
Rewind or fast forward the tape to the beginning
point from which you want to review.
2 Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly,.
3 Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
4 To activate "ZERO RETURN" mode
Press the MENU button on the remote control.
Press the PLAY/A or STOP/_' button to point to
"ZERO RETURN".
Then, press the EFWD/_ button.
The counter will appear on the TV
screen.
The tape will automatically stop
when the counter returns to 0:00:00.
-MENU- 1
X_ER _FUUCMINO
P_TUAE O0_rTRO-
SLtriTNGCaOCK
¢*bUq_*_t SET Up
U6ER"S8_r iJ_
v_,_p _=T tip
WOEX SEA_A
TIME SEARCH
The Time Search function makes it possible to
quickly advance the tape to your desired position
simply by entering the exact amount of playback
time you want to skip.
EN
9103