SDPF1079
Introduction Table of Contents Congratulations on your purchase of Digital Photo Frame, model SDPF1079. Before operating the unit, please read this manual thoroughly, and retain it for future reference. This manual will help you use many of the exciting and useful features that will make your Digital Photo Frame viewing more enjoyable. 1 1 This Digital Photo Frame lets you view digital pictures directly from your camera's memory cards.
Main Unit Controls Using your SD card Upon using an SD card, insert it to the corresponding slot flatly with the label side facing you. 6 5 7 DC IN 5V 3 Note: Please do not disconnect USB device or plug out SD/MMC/MS card while they are working with the unit.Functional failure may occur in case of wrong operations.
Using Your Digital Photo Frame through the remote control Make sure you have at least one image file on your memory cards or USB flash drive. Image Settings While viewing an individual image, press “ Setup” button on the remote control, you will then be given a list of possible features to change: Switch on the frame and insert memory cards into the unit, it will automatically start slideshow. OSD Language: Select the on screen display language.
Clock / Calendar Settings Troubleshooting 16:05 , press “ OK ” button or Press" Exit" repeatedly to highlight “ Clock” icon wait for 3 seconds, it will enter into clock/calendar interface. Press “Setup” button on the remote control, you will then be given a list of possible settings: Symptom Cause Corrective Actions Digital Photo Frame doesn't power on The power connector to the unit is not securely inserted. Make sure you connect the AC adaptor to the frame properly.
