Manual

<( Others )>
Repairing appears on the display • If there is a power failure or unplugging during recording,
finalizing, formatting or editing (even after "wait for a moment,"
message is disappeared), a Repairing process will begin
automatically soon after turning the unit on again,
It may take several minutes up to about four hours.
Picture noise appears.
The tape does not play.
Recording does not start immediately
after you hit [REC/OTR],
The remote control does not function.
The motor rotates even when playback /
recording is stopped.
• Head cleaning forVCR may be necessary.
Refer to "AUTO HEAD CLEANING".
• Adjust tracking control for better picture by pressing
[CHANNEL A/v] on this unit or [CH A/v] while you
are playing a videotape
• No videotape is inserted
• Make sure the videotape has a record tab when you record to a
videotape If needed, cover the hole with cellophane tape
• Check if a videotape is in this unit
• The motor may rotate for the duration of approximately S
minutes for efficient operationThis is not a malfunction
I Disc Error ] Unplayable disc is inserted Insert the standardized disc which
-- Please elect the disc. -- in the unit. bears the marks on page 40.
Playback feature may not be The disc is upside down. Insert the disc with the labeled side
available on this Disc. facing up.
Region Error ]
-- Please eject the disc,-
PI@,back is not authorized in your
region.
[ Parental Lock On ]
The current selected parental level
Prohibits playback,
The region of the DVD-Video
disc does not match the ones
on the unit.
The current selected parental
level in the SETUP Menu
prohibits playback,
Insert the DVD-Video disc with
region code I or ALL.
Check the "Parental Loci<" setting
(pages 7374)
I Recording Error ]
This program is not allowed
to be recorded.
The recording function encountered You cannot record copy prohibited
a copy prohibited program, programs,
I Recording Error ]
This program is not
recordabie in Video mode.
You are trying to record a copy-
once program onto the DVD-RVV
disc inVideo mode.
Set "DVD-RVV Recording Format"
to "VR mode" (page 27).
I Recording Error ]
Can not record on this disc.
You are trying to record onto the
disc which is unrecordabJe, or the
disc status is unable to record,
The disc is dirty.
The disc is damaged.
Insert a recordabJe disc, and
ensure the disc status satisfies the
recording requirements (pages 25-26).
Clean the disc with a cleaning cloth.
Replace the disc.
I Recording Error ]
This program is not allowed to
be recorded on this disc.
You are trying to record a copy-
once program onto the DVD-RW
disc which is not compatible with
CPRM.
Insert a venl.1 or 1.2 CPRH
compatible DVD-RW disc.
I Recording Error ]
This disc is protected and not
recordable.
You are trying to record on the
protected disc.
Cancel the disc protect setting
in the Disc Setting menu (page 35).
I Recording Error I
Disc is full
(No area for new recording)
You are trying to record onto
the disc with no recording space
left.
Insert the recordable disc with
enough recording space.
80