User manual

2) Plug one end of the supplied

modular cord into the TEL LINE

jack on the base’s back.

3) Plug the supplied AC adapter's

barrel plug into the DC IN 9V jack.

4) Route the adapter and modular

cords through the bracket’s grooves.

5) For a wall plate, align the bracket’s

keyhole slots with the wall plate

studs and slide the base downward

to secure it.

For direct wall mounting, align the

bracket’s keyhole slots with the

mounting screws and slide the

base downward to secure it.

6) Plug the adapter into a standard

AC outlet. And plug the modular

cord’s other end into a modular

phone line jack.

▼ Installing the Optional Beltclip (not included)

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down

untilit clicks.

To remove the beltclip

Pull both sides of the beltclip to release the tabs from the holes.

▼ Connecting/Charging the Battery Pack

The phone comes with a rechargeable nickel-cadmium battery pack in the

handset, but not connected. Before using your phone, you must connect

the battery pack. Then charge it for about 15–20 hours.

TEL LINE

DC IN 9V

UP044DH (ST88245) OM resize 9/15/04 2:20 PM Page 8