User manual

Safety instructions
Damages due to failure to follow these operating instructions will void the warranty! We
do not assume any liability for any resulting damage! We do not assume any liability for
material and personal damage caused by improper use or non-compliance with the safety
instructions. In such cases, the warranty will be null and void.
a) General
• Unauthorised conversion and/or modication of the product is not allowed for safety and
approval reasons.
• The product is not a toy and does not belong in the hands of children! Children do not realise
the danger arising from the incorrect use of electrical devices.
• Do not leave packaging material carelessly lying around, since it could become a dangerous
plaything for children.
• If it can be assumed that safe operation is no longer possible, the device must be turned off
and precautions must be taken to ensure that it is not used unintentionally.
Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- the product does not work at all or works poorly (where there is ickering light, leaking
smoke or a smell of burning, audible crackling noises, or discolouration of the product or
to adjacent surfaces)
- the product was stored for a longer period of time in unfavourable conditions
- it was exposed to heavy loads during transport
• In commercial institutions, the accident prevention regulations of the Employer’s Liability
Insurance Association for Electrical Systems and Operating Facilities are to be observed!
• Do not use this product in hospitals or medical institutions. Radiowaves may interfere with
medical equipment. The same may also apply to other areas.
• If you have any questions that are not answered in these operating instructions, please
contact our technical department or another specialist.
b) Installation location
• This product must be installed and used only in dry conditions indoors. The product must
not get damp or wet, as the wall plug transformer can pose the risk of a fatal electric shock!
• Do not use the product in rooms that are under adverse environmental conditions, where
combustible gases, vapours or dust are or may be present! There is a risk of explosion!
• The product must not be exposed to extreme temperatures, strong vibrations or heavy
mechanical stress.
• The product is suitable for use only in moderate climates, not tropical climates.
• The product is not designed to be used in explosive environments.
• The product heats up during use. Keep ammable materials at a safe distance.
c) Power adapter
• Connect the power adapter to a wall socket that can be accessed easily.
• As power supply, only use the supplied power adaptor.
• Only connect the power adaptor to a normal mains socket connected to the public supply.
Before plugging in the power adaptor, check whether the voltage stated on the power adaptor
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the cable; always use
the grips on the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or damaged
by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
• For safety reasons, disconnect the power adaptor from the mains socket during storms.
Operating instructions
Smart RGB LED Strip
Item no. 1681125 // WS3 – 3 m
Item no. 1681126 // WS3 – 5 m
Intended use
The product is intended for decorative or effect lighting in indoor areas. The product connects to your WLAN
and can be controlled from an accompanying mobile app.
The product can be fastened on suitable objects, such as furniture, using the adhesive tape located on the
bottom side of the LED strip.
Keep away from water and high-humidity sources and the areas where these conditions occur (e.g.
bathroom). Only use the supplied power adapter to operate the product.
Read the operating instructions carefully and do not discard them. If you pass the product on to a third party,
please hand over these operating instructions as well.
Any use other than that described above could lead to damage to this product and involves the risk of short
circuits, re, electric shock, etc. No part of the product may be modied or recongured! Please observe the
safety instructions at all times!
This product complies with the applicable national and European requirements. All names of companies and
products are the trademarks of the respective owners. All rights reserved.
Mobile Application
There are compatible Android and iOS apps
available from the respective app stores. Look for
the “Sygonix Home” app and download it onto
your mobile device.
An app instruction manual is available from
the URL listed in chapter „Up-to-date operating
instructions“.
Package contents
• Smart LED Strip
• Controller
• Power adapter
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR
code above. Follow the instructions on the website.
Explanation of symbols
A triangle containing a lightning symbol indicates a health hazard, e.g., electric shock.
The symbol with the exclamation mark in the triangle is used to highlight important information
in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
The product is compatible with the Conrad
Connect IoT platform at
www.conradconnect.de
1
6 8
2 4 53
7
1 LED strip / Controller connection
2 Indicator lights
3 Controller
4 Eye
5 LED strip / Power adaptor connection
6 LED strip
7 LED light
8 Cutting location