Operating instructions

Place the sharpener on a flat surface close to an easily
accessible socket outlet. Plug the sharpener into the
wall socket using the power cable provided.
Insert the pencil centrally, holding it firmly but
pressing only lightly.
The sharpener will automatically sharpen and stop
when the pencil is sharp.
Remove the pencil.
Empty the shavings tray if necessary by holding it
over a waste bin and sliding it out horizontally from
the main sharpener unit.
Latitude Electric
Pencil Sharpener
Operating
Instructions
Please read the following instructions
before operating your sharpener.
l To be used under adult supervision only.
Cleaning
Regular cleaning will ensure that your sharpener operates eciently.
l Use a small brush (e.g. paintbrush or toothbrush) to clean the
cutting blade. Never use metal objects as this may damage the
cutting blade.
l The shavings tray can be removed and cleaned with water only.
Never clean the main sharpener unit with water or use solvents such
as alcohol or thinner.
Coloured Pencils
l Sharpening coloured pencils causes wax to build up on the
sharpener blade.
l We recommend alternating between coloured and graphite pencils
as graphite will help to clean the blade.
l If excessive build up occurs then clean the blade as per the
instructions above.
3
4
5
1
2
Safety Switch
l This sharpener is tted with a safety switch ensuring that it cannot
be operated unless the shavings tray is fully in place.
Thermal cut-out system
l This sharpener is suitable for intermittent use and should not be
used continuously for more than 5 minutes.
Long continual use will cause the thermal cut-out system to
activate. This is a safety feature and the sharpener will require
a cool down period of approx. 20 minutes before it is ready
for use.
Replacement Blades
l As with all sharpeners, frequent use will eventually blunt the
sharpener blade. For replacement blades, please contact your
supplier quoting product code 40802.
5
2
For troubleshooting and product support, please visit www.swordshsupport.com
Model Product Code
Replacement
Blade Code
Compatible Pencil
Size(s)
Latitude
40052
40802 8mm