INSTALLATION INSTRUCTIONS Swiss Madison www.swissmadison.com | 19 Stults Rd, Dayton, NJ 08810 | 1-434-623-4766 | info@swissmadison.
Thank you for your purchase Thank you for purchasing a Swiss Madison Shower Base. We appreciate your business and know you will enjoy your shower base for many years to come. If you have any questions or require assistance we would be happy to help, please contact us at 1-434-6234766 or info@swissmadison.com. To learn more about our prodcuts, please visit: www.swissmadison.
SHOWER BASE MODELS SKU NAME SM-SB510 Concorde® 48” X 36” White Center Drain Shower Base SM-SB511 St.
SHOWER BASE INSTALLATION INSTRUCTIONS L W H SKU NAME SM-SB510 Concorde® LxWxH 48” X 36” X 5.5” DRAIN Center SM-SB511 St. Tropez® 36” X 36” X 5.5” Center SM-SB512 Voltaire® 60” X 36” X 5.5” Right-Hand SM-SB513 Voltaire® 60” X 36” X 5.5” Left-Hand SM-SB514 Voltaire® 60” X 32” X 5.5” Right-Hand SM-SB515 Voltaire® 60” X 32” X 5.5” Left-Hand SM-SB516 Voltaire® 48” X 32” X 5.5” Center SM-SB517 Voltaire® 48” X 32” X 5.
SHOWER BASE INSTALLATION INSTRUCTIONS CAUTION: DO NOT use drywall screws to secure flanges to wall studs. Product damage will occur and will void the warranty. Entire bottom support must be in contact with a flat level surface. 1. 2. Read the complete instruction manual before beginning installation. Confirm that your model will fit in intended location and plumbing fixtures are located where legally required before beginning installation. Not all drawings on this manual are drawn to scale.
SHOWER BASE INSTALLATION INSTRUCTIONS Leveling the floor 1. 2. Verify that the shower base is level using the “level” tool on all four sides. • If the shower base is level proceed to step 2. • If shower base level use shims or mortar compound to adjust accordingly. Verify with “level tool.” Mark drain hole on floor. (All in floor plumbing must be installed by a certified plumber.) Level To ensure base is installed correctly, entire bottom support must contact a flat, level surface.
SHOWER BASE INSTALLATION INSTRUCTIONS Installing Shower Base 1. 2. 3. 4. Re-insert shower base into shower cavity making sure that shower base drain and floor rough-in are aligned. Before laying down shower base, fill shower cavity with expanding foam in snake formation. Leave 6-8 inches from end of shower area empty of expanding foam. Re-insert shower pan into shower cavity leaving 1/8” (use shims) between wood studs and shower base on all sides.
Swiss Madison ONE YEAR LIMITED WARRANTY 1-434-MADISON (623-4766) 19 Stulds Rd., Dayton, NJ 08810 www.swissmadison.com Swiss Madison® products are made with quality materials and excellent craftsmanship to provide the customers a long lasting product.
Prior to Installation: Inspect sink to ensure no damages have occurred while in shipping Observe all plumbing and building codes in accordance with your state and local requirements Additional floor and wall preparations may be necessary to avoid damage to the product General Recommendations: Read installation and maintenance instructions thoroughly before installing the sink. Be sure to use proper tools and always wear proper personal safety accessories for your protection.
