Wall-Hung Toilet INSTALLATION INSTRUCTIONS info@carltonplumbing.
WALL-HUNG TOILET INSTALLATION INSTRUCTIONS PRIOR TO INSTALLATION: · Inspect toilet to ensure no damages have occurred while in shipping. · Observe all plumbing and building codes in accordance with your state and local requirements. · All dimensions are nominal! Be sure to measure your toilet prior to installation. · The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies, Carlton cannot be held liable.
WALL-HUNG TOILET INSTALLATION INSTRUCTIONS 1. Install Tank Carrier System 2. Dry Fit Outlet Pipe and Inlet Pipe 3. Determine Pipe Size 4. Cut Pipes · Before toilet bowl installation, a wood frame and commercial or residential tank system is required. · Install according to manufacturer's instructions. · Apply lubricant on rubber washers of straight tube and connecting pipe, then insert into holes. · Draw lines on pipes as pictured below.
WALL-HUNG TOILET 5. Mount Toilet Bowl INSTALLATION INSTRUCTIONS · Apply lubricant to the joint surface on straight tube and connecting pipe. · Mount the toilet bowl to the wall. 6. Level and Attach Bowl · Attach bowl using the washers and bolts, make sure the bowl is level, then cover with included cap. · Fill any gaps with cement or sealant.
WALL-HUNG TOILET INSTALLATION INSTRUCTIONS TOILET SEAT INSTALLATION 2. Construct Hinges 1. Dissassemble · Insert screw and nut into the hole on the hinge. · Attach blind hole screw fixing to the bottom of screw. · Disassemble the cover cap and the hinge. Pull or 3. Attach Hinges · Insert hinges with blind hole screw fixings attached into holes on toilet bowl. · Lightly tighten hinges with a screwdriver too allow for later adjustment. 4.
WALL-HUNG TOILET INSTALLATION INSTRUCTIONS 5. Adjust and Attach Seat · Align seat to the hinges then firmly tighten the hinges. · Attach seat to the secure hinges. · Adjust seat to align to the bowl. TOILET SEAT USAGE · To remove, push middle button until you hear a “click”, then pull straight up. · To re-install, align hinge posts with reference marks on seat, then push down until your hear a “click”.
ONE YEAR LIMITED WARRANTY Carlton products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products. Should there be any defects in materials or craftsmanship under regular use that are discovered within the first year of installation, Carlton will provide replacement parts at no charge, or at its discretion, replace any product or part of the product that is deemed defective, under normal installation, use, service or maintenance.
