MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner’s Manual 2643 2646 Plow Blade 2645R 2644 2645R IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. ATV ACCESSORIES Sold as Separate Pieces!!!! ASSEMBLY OPERATION SERVICE AND ADJUSTMENT REPAIR PARTS Made In The USA 1602 CORPORATE DRIVE WARRENSBURG, MISSOURI 64093 PH 660. 747. 8183 FAX 660. 747. 8650 swisherinc.com 11529 REV.
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship.
In the event you have a claim under this warranty, you must return the product to an authorized service dealer. All transportation charges, damage, or loss incurred during transportation of parts submitted for replacement or repair under this warranty shall be borne by the purchaser. Should you have any questions concerning this warranty, please contact us toll-free at 1-800-222-8183.
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. Failure to observe the following safety instructions could result in serious injury or death. • Read the manual. Learn to operate this machine safely.
ASSEMBLY, INSTALLATION and PARTS LIST 5
TO ENSURE PROPER ASSEMBLY, CAREFULLY FOLLOW ALL INSTRUCTIONS LISTED BELOW REFER TO FIGURES 1 AND 2 WHILE ASSEMBLING THIS PORTION OF THE PLOW ATTACHMENT 1. 2. 3. 4. 5. 6. Unpack parts and make sure all are included. If they are not contact the dealer where the Swisher Plow was purchased. Locate the pivot weldment (1) and assemble to the blade (2) using two ½-13 X 2” bolts (12) two ½-13 nyloc nuts (13) and two bushing (18) as shown.
PLOW ATTACHMENT ASSEMBLY FIGURE 2 2 17 15 7 14 6 16 8 1 13 12 4 7 3 13 18 9 11 22 10 28 18 12 5 13 13 See detail on Page 8 19 28 21 27 20 ITEM NO. QTY. 1 1 2 3 PART NO. 21 26 30 ITEM NO. QTY 2323TK Pivot Weldment 17 2 AS-125 Round Vinyl Cap 1 2150TK 50" Rolled Blade Weldment 18 8 NB-177 1/2 NR Mach.
TO ENSURE PROPER ASSEMBLY AND INSTALLATION, CAREFULLY FOLLOW ALL INSTRUCTIONS LISTED BELOW REFER TO FIGURES 2 AND 3 WHILE ASSEMBLING AND INSTALLING THIS PORTION OF THE PLOW ATTACHMENT The next steps need to be done in sequence: 1. Disassemble Pivot Latch assembly from the plow mount. Lay parts down in the exact order they were removed. Replace lock nuts (25) with lock nuts in hardware kit. 2. Slide the plow mount (19) into pivot weldment (1), secure with ½-13 X 3 1/2 bolt (28) and ½-13 nyloc nut (13). 3.
ADJUSTMENT AND OPERATION PUSH YOUR PLOW AROUND!! THE TENSION PLACED ON THE TILT SPRINGS DETERMINE THE AMOUNT OF PRESSURE THAT MUST BE APPLIED TO THE BLADE BEFORE IT FOLDS OVER IF SOMETHING IS HIT. ADJUST THE SPRINGS BY LOOSENING THE NUTS (7) ON THE EYEBOLTS (6) AND ADJUSTING UNTIL THE BLADE DOES NOT FOLD OVER DURING NORMAL OPERATION BUT WILL FOLD IF AN OBJECT IS STRUCK. AFTER INSTALLING YOUR PLOW, SECURE THE ROPE SO IT IS ACCESSABLE WHILE OPERATING THE ATV AND SECURELY HELD.
Notes: 10
Notes: 11
MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner’s Manual Plow Blade 2645R ATV ACCESSORIES WHEN ORDERING PARTS, PLEASE HAVE THE FOLLOWING INORMATION AVAILABLE: * PRODUCT – ________________ * SERIAL NUMBER - _______________ * MODEL NUMBER - _______________ TYPE - _______________ * PART NUMBER WITH PAINT CODE * PART DESCRIPTION TELEPHONE - 1-800-222-8183 FAX - 1-660-747-8650 SWISHER 1602 CORPORATE DRIVE WARRENSBURG, MO 64093 IMPORTANT Read and follow all Safety Precautions and Instructions Before
