Installation Guide

ManualsBrandsSwing-N-Slide Playsets ManualsKitchenPlayful Palace Wood Complete Playset

**IMPORTANT PLEASE READ**

is is a notice of a running change to the Swing Hangers and some screws included in the following playsets:

Jamboree, Playful Palace, Scrambler

Swing Hanger running change:

COMPONENTS

Plan (x1)

Coolwave Slide (x1)

(PB 8331 0NLY)

ASSEMBLY INSTRUCTIONS

Visit our website at: www.swing-n-slide.com or call us at 1-800-888-1232

LA 9122

PB 8327

PB 8331

IMPORTANT!!

PLEASE READ BEFORE BEGINNING ASSEMBLY!!

Please make sure all lumber, hardware and accessory parts are accounted for.

If you are missing anything, please DO NOT RETURN to the store where purchased.

Please call our Customer Service Department at the number below.

NOTE:

SLIDE NOT INCLUDED

WITH PB 8327

STD Swing Seat (x2)

58” Dipped Chain (x4)

5/16’’ x 5-1/2’’ Swing Hanger (x6)

Window Pane (x1)

Swing Beam Bracket (x2)

Beam Brace (x1)

ID Tag (x1)

Tarp (x1)

Play Handle (x2)

Steering Wheel (x1)

COMPONENTS

Anchor It Strap (x4)

Anchor It (x4)

Climbing Rock (x6)

Beam Clamp Slotted (x6)

Flag Assembly (x2)

Telescope (x1)

Trapeze Bar (x1)

Iron Man Ring (x2)

33” Dipped Chain (x2)

NOT INCLUDED IN

YOUR PLAYSET

ANY LONGER

PF 1574 CAP

& HARDWARE

(x6)

48" COATED CHAIN

(x4)

24" COATED CHAIN

(x2)

2449

L-BRACKET

(x2)

2434 SWING

(x2)

2448L

ANGLED BRACKET LEFT

(x2)

2447R

ANGLED BRACKET RIGHT

(x2)

WS 4425

SWING HANGER

(x6)

2096 TRAPEZE

(x1)

PF 6092 3/4" X 3-3/8" X 68" A-BRACE (x2)

PF 6091 2-3/8 X 3 X 87-1/2" LEG (x4)

PF 6090 2-3/8 X 5-1/8 X 87-1/2" SWING BEAM (x1)

ANCHOR-IT STRAP

SA 1699

PLAYSET PLAQUE (x1)

HARDWARE

COMPONENTS

(x4)

INCLUDED

(x4)

ANCHOR-IT

INSTRUCTIONS BOOKLET

SA 4294

SAFETY PLATE (x1)

HARDWARE

INCLUDED

PF 1574 CAP

& HARDWARE

(x6)

48" COATED CHAIN

(x4)

24" COATED CHAIN

(x2)

2449

L-BRACKET

(x2)

2434 SWING

(x2)

2448L

ANGLED BRACKET LEFT

(x2)

2447R

ANGLED BRACKET RIGHT

(x2)

WS 4425

SWING HANGER

(x6)

2096 TRAPEZE

(x1)

PF 6092 3/4" X 3-3/8" X 68" A-BRACE (x2)

PF 6091 2-3/8 X 3 X 87-1/2" LEG (x4)

PF 6090 2-3/8 X 5-1/8 X 87-1/2" SWING BEAM (x1)

ANCHOR-IT STRAP

SA 1699

PLAYSET PLAQUE (x1)

HARDWARE

COMPONENTS

(x4)

INCLUDED

(x4)

ANCHOR-IT

INSTRUCTIONS BOOKLET

SA 4294

SAFETY PLATE (x1)

HARDWARE

INCLUDED

Beam Clamp (Old)

Swing Hanger (Old)

Swing Hanger (New)

Replaced by

Black Cap (New)

GO TO NEXT PAGE

Swing-N-Slide, Inc. LDR 12-19-2022 LA 9466A

Summary of content (4 pages)

PAGE 1
PLAYSET PLAQUE (x1) HARDWARE INCLUDED SAFETY PLATE (x1) HARDWARE INCLUDED 2434 SWING (x2) This is a notice of a running change to the Swing Hangers and some screws included in the following playsets: Jamboree, Playful Palace, Scrambler 48" COATED CHAIN COMPONENTS (x4) 24" COATED CHAIN Swing Hanger running change: (x2) **IMPORTANT PLEASE READ** 2096 TR (x1 COMPONENTS PF 6090 2-3/8 X 5-1/8 X 87-1/2" SWING BEAM (x1) ANCHOR-IT STRAP (x4) Beam Clamp (Old) PF 6091 2-3/8Window X 3 X 87-1/2" Pane (x1)LEG (x4
PAGE 2
Hanger Bolt must protrude at least STEP 4:Swing SWING HANGERS TWO Threads beyond Lock Nut. 2-11/16" x 5-3/8" x 93" PF 6019 x1 IMPORTANT! 2 Threads MIN. #6 X 1-1/4" WOOD SCREW X 12 PF 1574 X 6 CAP Use a socket wrench to tighten Lock Nut securely against washer. Lock Nut 1-3/8" Washer 3/8" LOCK NUT X 6 HOLD position of 1-3/8" FLAT WASHER X Hanger 6 Swing while Lock Nut tightening Lock Nut.
PAGE 3
SWING CHAIN TO HANGER Attach a Quick-Link at the end of each swing and trapeze chain. Then, using the Quick-Links, attach the swings and trapeze to the Hanger Spring Clips on the swing beam, as shown below. Quick Link x6 Tighten all Quick Links using hand tools. Always use a Quick Link between chain and swing hanger for all chain connections and adjustments. Note: Your swing and trapeze may differ from the ones shown. GO TO NEXT PAGE Questions? Call our Customer Support Representatives 1.800.888.
PAGE 4
1-1/4" SCREW AND SWING HANGER ADDEDNDUM SWING BEAM 1-1/4” Screws running change: SWING HANGERS - INSTALL !! IMPORTANT - READ THIS ADDENDUM FIRST !!!! There are NO 1-1/4” screws included with the hardware bags to assemble the playset. Use the 1-3/16” (30mm) THERE NO 1-1/4" WOOD SCREWS IN THE FASTENER BAGS. YOU WILL THE 1-3/16" SCREWS. screws ARE provided in the hardware bag(s) whereever a 1-1/4”, 1-3/16”, or 30mm screwUSE is called out.