User Manual

AS-EQ1 Operator Manual
© 2009 SV Sound, LLC
•
6420 Belmont Avenue, Girard, OHIO
•
703.845.1472
•
www.svsound.com
SV Sound, LLC
If your AVR or Pre/Pro is NOT equipped with Audyssey MultEQ, make note of the Sub Distance and Trim
Values as these will need to be entered into your AVR or Pre/Pro in a subsequent step. By clicking on
the Distance Heading, Sub EQ will convert to Feet, Meters or Time (Milliseconds) to match the units you
are using in your AVR or Pre/Pro so you won’t have to manually compute the conversions before entry.
Click the button to continue to the next task
“Save Results to AS-EQ1”.
28
Calibrating the AS-EQ1 in Your Listening Environment
If your AVR or Pre/Pro does not have the capability to set the distance from your subwoofer(s) to your listening
position, you may need to move your subwoofer(s) closer to your listening position in order to maintain proper
phase alignment between the speakers and the subwoofer(s). This would typically only occur in a 2-channel
application with a stereo pre/pro which lacks speaker/subwoofer distance settings. If moving the subwoofers is
not possible, there are external devices available that can be used to delay the signal being sent to the speakers
in order to achieve the proper phase alignment between the speakers and the subwoofer(s).
Contact SVS Support for more information.
For Older AVRs or 2 Channel...