User's Manual

4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual

 The server computer does not need to install any software and drivers, and the server computer directly

recognizes KVM.

 Support OSD to set user login mode and increase the security requirements of KVM login.

 Support wide-screen resolution.

 Support DDC communication and adapt to a variety of graphics card devices.

 Auto Scan function can monitor all computer operations.

 Support cross-platform operation - Windows, Linux, Mac* and Sun*

 The keyboard and mouse connection port of the server computeradopts Keep Online technology to

simulate the keyboard and mouse. Therefore, the device is safe and stable, and the switching is fast

without delay.

Hardware requirements

Console

 A set of HDMI display screens that are compatible with the highest resolution of any computer to be

installed under the installation architecture

 A set of USB interface mice

 A set of USB interface keyboards

Computer

The following devices must be installed on each computer:

 A set of HDMI video graphics cards

 USB Type A connection port

Cable

The KVM device provides two types of connection cables to choose according to the user's usage:

 HDMI cable

 The cable for the transfer from USB TYPE A to TYPE B

Note: The cable length will affect the quality of the display. If you need a connection cable of other length,

please contact the merchant you purchased from to choose a cable suitable for this switch.