MSDS

ManualsBrandsSurebonder ManualsTools & Hardware7/16 in. D x 10 in. L Unique High Performance Adhesive with Glue Sticks (25 lb. per Box)

MATERIAL SAFETY DATA SHEET

Page 1 of 6

Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, Australian WorkSafe, Japanese Industrial Standard JIS Z 7250:2000, and European Union standards

1. PRODUCT IDENTIFICATION

TRADE NAME (AS LABELED): FPC 925

CHEMICAL NAME: EVA Based Formulation

PRODUCT USE: Hot Melt Adhesive

MANUFACTURER'S NAME: FPC Corporation

ADDRESS: 355 Hollow Hill Drive

Wauconda, IL 60084

BUSINESS PHONE: 847-487-4583

FAX NUMBER: 847-487-0174

DATE OF PREPARATION: May 6, 2011

2. HAZARD IDENTIFICATION

EU DANGEROUS PREPARATIONS DIRECTIVE (DPD) LABELING AND CLASSIFICATION: This product does meet the

definition of a hazard class, as defined by the European Union Council Directives 67/548/EEC and 1999/445/EC and

subsequent Directives.

Hazard Classification: [Xi] Irritant, [Xn] Harmful

Risk Phrases: R21; R36/37/38

Safety Phrases: S23; S24/25

Annex II Hazard Symbol:

EMERGENCY OVERVIEW: Product Description: This product is a white solid, with a negligible odor. Health

Hazards: Contact with this material can cause irritation to the skin, eyes and mucous membranes. Contact with molten

material will cause thermal burns. Flammability Hazards: This product is Flammable at elevated temperatures.

Reactivity Hazards: None Environmental Hazards: This material is not expected to be an environmental hazard

Emergency Considerations: Emergency responders must wear the proper personal protective equipment (and have

appropriate fire-suppression equipment) suitable for the situation to which they are responding.

3. COMPOSITION and INFORMATION ON INGREDIENTS

Hazardous Ingredients:

CAS #

EINECS #

ICSC #

WT %

Hazard Symbol;

Risk Phrases

No Hazardous Ingredients

Not Listed

100%

HAZARD CLASSIFICATION: NOT CLASSIFIED

RISK PHRASES: NONE

Balance of other components. Each of the other components is present in less than 1

percent concentration (0.1% concentration for potential carcinogens, reproductive toxins,

respiratory tract sensitizers, and mutagens)

NOTE: ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-2004 format. This

product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the

information required by the CPR, EU Directives and the Japanese Industrial Standard JIS Z 7250: 2000. This material is

classified as non-hazardous under OSHA regulations 29 CFR 1910.1200.

See Section 15 for full text of Ingredient Risk Phrases and Safety Phrases

Summary of content (6 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, Australian WorkSafe, Japanese Industrial Standard JIS Z 7250:2000, and European Union standards 1. PRODUCT IDENTIFICATION TRADE NAME (AS LABELED): CHEMICAL NAME: PRODUCT USE: MANUFACTURER'S NAME: ADDRESS: FPC 925 EVA Based Formulation Hot Melt Adhesive FPC Corporation 355 Hollow Hill Drive Wauconda, IL 60084 847-487-4583 847-487-0174 May 6, 2011 BUSINESS PHONE: FAX NUMBER: DATE OF PREPARATION: 2.
PAGE 2
MATERIAL SAFETY DATA SHEET 4. FIRST-AID MEASURES Contaminated individuals of chemical exposure must be taken for medical attention if any adverse effect occurs. Rescuers should be taken for medical attention, if necessary. Take copy of label and MSDS to health professional with contaminated individual. SKIN EXPOSURE: If hot product contacts skin, cool under running water. Do not remove solidified product. The contaminated individual should seek medical attention.
PAGE 3
MATERIAL SAFETY DATA SHEET 7. HANDLING and STORAGE For Commercial use Only – Not Packaged or Labeled for Home Use! WORK PRACTICES AND HYGIENE PRACTICES: As with all chemicals, avoid getting this product ON YOU or IN YOU. Wash thoroughly after handling this product. Do not eat, drink, smoke, or apply cosmetics while handling this product. Avoid breathing mists or sprays generated by this product. Use in a well-ventilated location. Remove contaminated clothing immediately.
PAGE 4
MATERIAL SAFETY DATA SHEET 9. PHYSICAL and CHEMICAL PROPERTIES DENSITY: 0.96 g/cc EVAPORATION RATE (n-BuAc=1): Not applicable SPECIFIC GRAVITY @ 20C: NA (water=1) SOLUBILITY IN WATER: Non soluble VAPOR PRESSURE, mm Hg @ 20°C (68F): NA pH: NA ODOR THRESHOLD: Negligible APPEARANCE, ODOR and COLOR: This product is a white solid, with a negligible odor. 10. STABILITY and REACTIVITY STABILITY: Stable.
PAGE 5
MATERIAL SAFETY DATA SHEET ENVIRONMENTAL STABILITY: Controls should be engineered to prevent release to the environment, including procedures to prevent spills, atmospheric release and release to waterways BIOACCUMULATION/ACCUMULATION: These products have not been tested for bio-accumulation potential. 13. DISPOSAL CONSIDERATIONS PREPARING WASTES FOR DISPOSAL: Waste disposal must be in accordance with appropriate U.S.
PAGE 6
MATERIAL SAFETY DATA SHEET EUROPEAN ECONOMIC COMMUNITY INFORMATION: EU DANGEROUS PREPARATIONS DIRECTIVE (DPD) LABELING AND CLASSIFICATION: This product does meet the definition of a hazard class, as defined by the European Union Council Directives 67/548/EEC and 1999/445/EC and subsequent Directives. Hazard Classification: [Xi] Irritant, [Xn] Harmful Risk Phrases: R21; Harmful in contact with skin; R36/37/38: Irritating to eyes, respiratory system and skin.