Owner Manual

54
|
WARNING
TO PREVENT PERSONAL INJURY
Before removing the doors, make sure the pins are properly installed in the hinges. Failure to
do so can result in personal injury to hands and/or fingers.
The door can be completely disassembled to guarantee the general cleaning, of the glasses and the other
parts. To disassembe the door you must observe the following procedure.
• Open the door and x the pin as indicated in picture 1.
• Put the hands on the internal glass surface, in the center, generate a small pressure and after slide back the
glass, as indicated in picture 2.
• Grasp the glass, rotate and remove as indicated in pictures 3 and 4.
• Grasp the bars and remove as indicated in pictures 5 and 6.
• Grasp the intermediate glass, rotate and remove as indicated in pictures 7 and 8.
Assamble again the door repeat all the operations but exactly one after the other in the
reverse sequence.
Before closing the door don’t forget to remove the pins.
1 32 4
5 76 8
Door Removal
Door Replacement and Adjustment