6 oz.
Congratulations! You have purchased a popper from one of the most trusted names in the industry. This industrial-strength commercial popper is the same one used by sport stadiums, convenience stores and mini-marts. We use only the finest grade material and workmanship when manufacturing our popcorn machines. If for any reason our popper doesn't live up to these standards described, please write to us at sales@superiorpopcorn.com Visit SuperiorPopcorn.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: • • • • • • • • • • • • • • • • • • • • • • • • • • READ ALL INSTRUCTIONS BEFORE USING YOUR POPCORN MACHINE. Do not touch hot surfaces. Always use handles or knobs to operate. To avoid any risk of electrical shock, do not immerse cord or plug in water. Close supervision is necessary when being used near children.
IMPORTANT SAFEGUARDS: KETTLE • • • • KEEP OUT OF REACH OF CHILDREN. DO NOT CLEAN USING ANY ABRASIVE MATERIAL. NEVER FORCE ANY PARTS OR BRACKETS INTO POSITION. NO PARTS ARE INTENDED FOR THE DISHWASHER. CAUTION: DO NOT IMMERSE THE KETTLE IN WATER! SAVE THESE INSTRUCTIONS ELECTRICAL CORD a) A short power-supply cord is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. b)Longer extension may be used if care is exercised in their use.
ASSEMBLY INSTRUCTIONS Your brand new 16 Ounce Popper is made for commercial or household use. Your popcorn machine should come fully assembled, but the kettle may be removed and packed separately inside of the cabinet for extra protection. 1. Remove the packing material and wipe the inside of the kettle (B) with a clean dry cloth. 2. Hang the kettle onto the kettle hanger assembly in the main unit (A).
OPERATING PROCEDURES Please Note: If you are using your popper for the first time, clean the interior of the glass surfaces and wipe the inside of your popper with a clean damp sponge before heat is applied. Please follow these procedures for the best operating results and long machine life. 1. Place the popcorn popper on a dry, level surface. Protect from rain and other weather elements. Do not install near pool or water. Plug the unit into a suitable grounded electrical outlet.
OPERATING PROCEDURES-Continued 6. Next pour popcorn and seasoning from SPC Tri-Pack pouch into pre-heated oil. (Fig, 2) If using bulk kernels, measure the amount of corn by using the measure provided. For a full 16oz. batch, use 2 cups per batch. Open the lid and add the popcorn. Caution: Lid is hot; we recommend wearing oven mitts or potholders. Close lid. 7. Switch the Stirrer to ON (I). (Fig. 3) 8. Close the doors on the main unit carefully. 9.
CLEANING AND MAINTENANCE • After popping cycle is complete, the kettle will be very hot. Use extreme care when handling. • Remember to turn the Kettle, or heat switch to the OFF position after the finish of the pop cycle. • Unplug unit BEFORE removing kettle from hanger. Use caution not to bump heat lamp bulb during kettle rem oval.
