SDS

ManualsBrandsSuperFast ManualsFlooring & RugsFloors of Distinction® Diamond 5/8 x 4-3/4 Autumn Oak Solid Hardwood Flooring (12.4 sq.ft/ctn)

SDS

SuperFast Safety Data Sheet 2015

Wood Flooring

Revision date: 2015-10-24 Page 1 of 4

1 PRODUCT AND COMPANY IDENTIFICATION d

Product Name Wood Flooring (all grade and thickness)

Description Wood floor covering: solid wood flooring, multi-layers wood flooring, butcher-block wood flooring

2 HAZARDS IDENTIFICATION ………………….

Overview: Solid plank or tile material with brown core and overprinted designs. No appreciable odor.

Classification Regulation (EC) No 1272/2008: The material is not classified according to the CLP regulation.

Directive 67/548/EEC or Directive 1999/45/EC: Not applicable.

GHS-US: this product is not classified as hazardous.

OSHA Standard 29 CFR 1910.1200: no classification known

SARA Title III, Section 313: no classification known

HMIS: Health = 0, Flammability = 1, Reactivity = 0; Specific = 0 (0= minimal hazard; 4 = severe hazard)

NFPA: Health = 0, Flammability = 0, Reactivity = 0 (0= minimal hazard; 4 = severe hazard)

Route of Entry: None for product as sold. For dust or chips generated during fabrication operation: eye contact, skin

contact, and inhalation.

Target Organs: None

Inhalation: No hazard for product as sold. Fabrication operation such as milling, cutting, grinding, etc., may produce

dust or chips that may be irritating or harmful if inhaled. Repeated and prolonged inhalation of dust may

lead to chronic respiratory irritation. Asthmatics conditions may be aggravated be uncontrolled airborne

dust exposures.

Skin Contact: Solid piece (strip, sheet,…) may be abrasive to, or cut skin. Fabricating operations such as milling, cutting,

grinding,...may produce dust or chips that may be irritating.

Eye Contact: No hazards for products as sold. Fabricating operations such as milling, cutting, grinding, etc., may produce

dust or chips that may be irritating.

Ingestion: Not an expected route of entry with normal use of product.

3 COMPOSITION/INFORMATION ON INGREDIENTS m…..md

Name CAS No EC No % by weight GHS-US classification EC classification

Wood N.A. Not classified 90-95 Not classified Not classified

Resin 50-00-0 Not classified < 5 Not available R 10 /R 23/24/25/ R34

/R40/R43

Adhesive Not available Mixture < 1 Mixture

Pigment Mixture Mixture < 1 Mixture Mixture

Coating Mixture Mixture 1-5 Not available Mixture

Summary of content (4 pages)

PAGE 1
SDS SuperFast Safety Data Sheet 2015 Wood Flooring 1 Product Name Description PRODUCT AND COMPANY IDENTIFICATION Wood Flooring (all grade and thickness) Wood floor covering: solid wood flooring, multi-layers wood flooring, butcher-block wood flooring 2 Overview: HAZARDS IDENTIFICATION …………………. Solid plank or tile material with brown core and overprinted designs. No appreciable odor. Classification Regulation (EC) No 1272/2008: The material is not classified according to the CLP regulation.
PAGE 2
SDS Safety Data Sheet Wood Flooring 4 Inhalation: Ingestion: FIRST AID MEASURES ………... No hazard for product as sold. Fabrication operations such milling, cutting, grinding, etc., may produce dust or fines that may be irritating or harmful if inhaled. If irritation persists, seek medical attention. Solid piece (strip, sheet,…) may be abrasive to, or cut skin. Fabrication operations such as milling, cutting, grinding, etc., may produce dust or fines that may be irritating. Wash with soap and water.
PAGE 3
SDS Safety Data Sheet Wood Flooring 9 PHYSICAL and CHEMICAL PROPRERTIES ………………… Appearance: Plank or tile flooring Flash point: Not available Evaporation rate: Not available Physical state: Solid plank or tile Specific gravity: 0.8-0.95 (water = 1.0) Flammability: Not available Odor: No appreciable odor. Vapor pressure/density: Not available PH: Not available Relative density: 0.8-0.
PAGE 4
SDS Safety Data Sheet Wood Flooring 15 Formaldehyde: REGULATORY INFORMATION ………………… Formaldehyde emission of this product is within E1 standard (EN 717-1) Formaldehyde emission of this product is within the California Air Resources Board’s (CARB) Airborne Toxic Control Measure (ATCM) 93120 Title 17, California Code of Regulations, and meets the CARB Phase 2 standards. Product does not require special protection before, during and after installation of the flooring WEL formaldehyde – 8 hour TWA 2ppm – 2.