Installation Guide

Installation Guide
Your mosaic is a semi-artisanal product. Opening all the mosaic
sheets, spreading them out and ensuring the compliance of a
complaint after installation will unfortunately not be accepted.
Glue the support with a white C2S or epoxy type tile adhesive
(see manufacturer's instructions)
Grout with a thin sealant.
Clean the joints before complete drying with a slightly damp
sponge.
Position the sheets on the glued support, use a trowel or a
bat for a flat and uniform laying. Use spacers to ensure even
spacing between sheets. Respect the recommended drying
time.
Ensure that the surfaces are dry, smooth and clean. For
installation in a humid space (example: shower), a sealing
solution must be applied beforehand. The wefts of the sheets
can be cut using simple scissors.
1
2
3
4
5
6