Manual

STEP 2.9
Mat Turns and “Fill-in” Techniques
This page contains some of the common turns and tech-
niques used to layout around corners, angles, and built-ins.
Installing in front of cabinets and toilets:
CAUTION!
PROTECT THE MAT FROM TRAFFIC
If the floor covering is not immediately installed, protect the SunTouch mat by covering it
with corrugated box material or plywood. Keep traffic to a minimum on the installed mat.
Note: Install mat right up to the face of
the cabinet as shown above.
Note: Mat can be installed under tile to
within 4”–6” from the front of the wax
ring, and can slightly underlay the foot
of the toilet if need be (approximately
20” from wall).
SunTouch Space Warming Manual 9
Fill-in Technique.
Use clips or hot glue to attach
wire to the floor.
Orange
mat
removed.
180° or Back-to-Back Turn.
90° or Flip Turn.
Roll-over Turn.
2.75”
Carefully cut the orange woven mat to effect turns. Never cut, nick, or oth-
erwise damage the heating wire.
Cut mat
Roll
over
Cut mat
Rotate 90°
Flip
mat over
2.75”
Cut mat
Rotate 180°