Spec Sheet

ManualsBrandsSunstone ManualsOutdoor CookingDesigner Series 304 Stainless Steel 24 in. x 34.5 in. x 28.25 in. Appliance Cabinet for up to 15 in. W Fridge

COVER &

1-GANG BOX

FRONT & BACK

KICK PLATES

Product Dimensions

Product Inserts

SUNSTONE METAL PRODUCTS

DESCRIPTION

16004 CENTRAL COMMERCE DR.

PFLUGERVILLE, TEXAS 78660

Tel: 888.934.9449

Bus: 512.487.5116

Fax: 512.487.7016

34-1/2" HEIGHT W/LEGS

30-1/2" HEIGHT W/O LEGS

MATERIAL SPECS

304 Stainless Steel entire

structure, 18 Gauge for Door

Panel , 18 Gauge for Cabinet

Box, 18 Gauge for Shelf,

Handles are made of Solid 304

Stainless Steel Bar.

�Lifetime Structure Warranty

�304 Stainless Steel Structure

�Front & Back Kick-Plates

�Easy Pin-Lock Installation

�Covered Access Ports

�Adjustable Peg-Legs

�Optional Wheel Casters

�Assembly Required

Configuration Options

1-GANG

ELECT. BOX

INCLUDED COMPONENTS

�Front Kick Plates

�Back Solid Kick Plate

�(4) Adjustable Peg Legs

�Front Electrical Cover

�Back Panel Electrical Box

28-1/4" Depth

w/Panel

24" Width

PRODUCT DIMENSIONS

INSERT DIMENSIONS

INSERTABLE PRODUCTS

4" SS

PEG-LEGS

REMOVABLE

COUNTER RAIL

15" WIDTH

18-3/4" DEPTH

33-1/4"

HEIGHT

INCREASE

PEG-LEG

EXTENSION

RAISES 1-1/2"

ADDITIONAL

FOR ADA LEG

THE HEIGHT

IS 31-1/4"

15" WIDTH

SEE PAGE 3 OF SETUP-GUIDE

HOW TO INCREASE WIDTH

25-1/4" DEPTH

FRONT PANEL

TO LOWER

BACK SUPPORT

1. Standard Appliance

insert is 15" Width by

34" Height

2. Remove top Counter

Rail & Support to give

additional 1" Height for

taller appliance. Adjust

Peg-Leg Upto 1-1/2"

for increased height

allowance.

ADD 1" HEIGHT

BY REMOVING

COUNTER RAIL

& SUPPORT

PRODUCT

24" Appliance Cabinet for up to 15" Fridges

& Ice Makers w/Convenient front Electrical

Cover & Interior Back Panel 1-Gang

Electrical Box

24" Appliance Cabinet for

up to 15" Wide Fridge

Item No. SAC24APC

24"W x 28-1/4"D

(w/Panel) x 34-1/2"H

(w/Legs) or 30-1/2"H (no

Legs) or Upto 36" Max

Adjustable Height

Works with up to 15" Wide

Fridges, Wine Coolers & Ice

Makers

15-1/2" Width x 33-1/4"

Height x 25-1/4" Depth

Summary of content (5 pages)

PAGE 1
Product Dimensions 24" Width 28-1/4" Depth w/Panel REMOVABLE COUNTER RAIL 18-3/4" DEPTH HT W/LEGS 34-1/2" HEIG COVER & 1-GANG BOX 15" WIDTH SUNSTONE METAL PRODUCTS 16004 CENTRAL COMMERCE DR. PFLUGERVILLE, TEXAS 78660 Tel: 888.934.9449 Bus: 512.487.5116 Fax: 512.487.7016 PRODUCT 24" Appliance Cabinet for up to 15" Wide Fridge 30-1/2" H EIGHT W/O LEGS 1-GANG ELECT.
PAGE 2
SAC24APC SETUP INSTRUCTIONS A Before proceeding, review the individual Specification Sheets of each Panel, follow any base setup instructions - do not install any kickplates. SCC15SPE SCC4SPEL 1 SCC4SPER Bring all three panels together Item Numbers SCC15SPE, SCC4SPEL & SCC4SPER while supporting each in hand upright, elevate the back panel SCC15SPE so the individual Pins align up to the adjacent notches and the back panel attaches to each side item SCC4SPEL on left and SCC4SPER on right.
PAGE 3
SAC24APC SETUP INSTRUCTIONS C IMPORTANT! If you are placing any appliance which product height is higher than 34-1/2", you can either increase the height of Peg-Leg up to an additional 1-1/2" higher, or simply do not install the Support Arm giving you an immediate 1" additional height clearance. SCC15SPE Packaged with the back panel item no. SCC15SPE there is a cross-beam support with counter rail attached. This support beam supports the counter front.
PAGE 4
SAC24APC SETUP INSTRUCTIONS E 3 CREATE MULTIPLE APPLIANCE RUN BY ADDING ADDITIONAL BACK PANELS. 1 2 Connect multiple back panels to create multifridge Runs use Item No. SCC25SPE for Fridges up to 25" Width, SCC21SPE for Fridges up to 21" Width, and SCC15SPE for Fridges up to 15" Width. When connecting panels together you must use bolts in conjunction with the Lock-Nuts.
PAGE 5
SAC24APC SETUP INSTRUCTIONS G 4 IMPORTANT! Install All Electrical Boxes, & Peg Legs before proceeding further, follow these instructions. Electrical Wires are installed after all cabinets are connected but before counter is installed. Always use GFCI 2 way Electrical Outlet in front facing panel, standard electrical can be placed on the interior. See cover panel can be removed and hung below when electrical is in use.