Assembly Instructions

ManualsBrandsSunset Trading ManualsBar Stools30 Inch Bar Stool Antique Black and Cherry

1

Barstool

Instructions

Step 3 - Put 1 Lock Washer and 1 Washer to each bolt.

Attach the Swivel to the seat bottom through the access

hole in the Bottom of the Base Unit with all four (4) bolts.

Screw all 4 screws

in part way before

tightening with

Allen Wrench pro-

vided.

(Fig. 4)

Fig. 4

www.SunsetTrading.com

Barstool

Instructions

Step 3 - Put 1 Lock Washer and 1 Washer to each bolt.

Attach the Swivel to the seat bottom through the access

hole in the Bottom of the Base Unit with all four (4) bolts.

Screw all 4 screws

in part way before

tightening with

Allen Wrench pro-

vided.

(Fig. 4)

Fig. 4

www.SunsetTrading.com

Summary of content (2 pages)

PAGE 1
Step 3 - Put 1 Lock Washer and 1 Washer to each bolt. Attach the Swivel to the seat bottom through the access hole in the Bottom of the Base Unit with all four (4) bolts. Screw all 4 screws in part way before tightening with Allen Wrench provided. (Fig. 4) Barstool Instructions Fig. 4 www.SunsetTrading.com Step 3 - Put 1 Lock Washer and 1 Washer to each bolt. Attach the Swivel to the seat bottom through the access hole in the Bottom of the Base Unit with all four (4) bolts.
PAGE 2
Parts/Units, (Fig. 1) Fig. 1 Step 2 - Place Seat Top upside down on table or bench (lay a towel down to protect from scratches). Make note of the marking on the top of the Swivel that says FRONT. This side of the Swivel must be mounted toward the front of the Barstool seat in order to provide proper angle for sitting. Line up the four (4) slots in the Swivel top with the four (4) nut inserts that are mounted in the seat. (Fig.