Instructions / Assembly

SPECIFICATIONS
KEY FEATURES
Truth Operator for Ease of Opening
Integrated Bug Screen
Bronze or Mill Finish
Manually
Venting
Double Hip, Pyramid
and Flat Skylights
Frame Model 840B
PRODUCT PROFILE
Skylights shall be Sunoptics model 840B (curb mounted) as manufactured by
Sunoptics Skylights, 6201 27th Street, Sacramento Ca. 95822 916/395-4700
Skylights shall be glazed ready for installation.
Skylight frames shall be fabricated from 6063 T5 aluminum, finish as specified.
Frames shall have integral condensation and weepage gutters which drain
interior moisture to the outside. Corners shall be mitered and welded. Skylight
frames shall be thermally broken. The acrylic glazing shall be separated from
the skylight frame with an EPDM rubber air seal gasket.
Skylights shall be operated using Truth Inc. chain drive manual operator and
include a bug screen.
Skylights shall be glazed using CC2 acrylic, and/or polycarbonate in a pyramid
or double hip configuration.
Note: Multi-glazed units default to include Insulated Thermal Break (ITBR), Curb
Tape (CTape), Weather Sweep (WSW) and screws. Single-glazed units default to
not included any of these options.
Certain airborne contaminants can diminish the integrity of acrylic and/or
polycarbonate lenses. Refer to the compatibility tables for suitable uses on our
website.
Skylights not for use in Harsh, Corrosive, Marine and high-humidity Environmental
Conditions such as Marina, Greenhouses, Petrol-Chemical facilities or other chemicals
where the skylights may be exposed to such conditions.
Standard pole is 3 ft. and adjustable up to 5 ft.
Also available with 3 ft. extensions.
Details Not To Scale
Type SHGC U-Value VLT
Single Glazed Acrylic .68 n/a .74
Single Glazed Poly .68 n/a .70
Double Glazed Acrylic/Acrylic .51 .73 .68
Doubled Glazed Poly/Poly .51 .73 .63
Triple Glazed Acrylic/Acrylic/Acrylic .42 .63 .63
Triple Glazed Poly/Poly/Poly .42 .63 .60
NOTE: It is recommended that you use the required Curb dimension to
maintain an even reveal on the inside finished opening)
CURB SEAL TAPE
TRUTH OPERATOR
OPERATOR AND HINGE
ON WIDTH SIDE.
SILICON SEAL
SKYLIGHT
FASTENNERS
EXTRUDED
ALUMINUM
FRAMES
ROOF CURB
ORDERED
SEPARATELY
EPDM TAPE
GLAZING SEAL
THERMAL BREAK COVER
WHITE
DOUBLE HIP PYRAMID
DGZ LENSCLWH Option Shown
BUG SCREEN
Double Glazed
6201 27th Street, Sacramento, CA 95822 | 916-395-4700 | 800-289-4700 | 916-395-9015 fax www.sunoptics.com 840B_Manually Venting
Warranty: 5-year and 10-year limited warranty available. Complete warranty terms
located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and
application.
Specifications subject to change without notice.
Cleaning Acrylic Lenses: Frequency of cleaning is determined by site conditions.
When cleaning acrylic lenses, use only water or water with a mild soap. Use a soft rag
to minimize scratching the acrylic. A pressure washer is acceptable to use as well. Never
use ammonia, aromatic or petroleum based products to clean acrylic lenses. This will
cause deterioration and cracking of the lens and will void the warranty.
Skylights should not be installed in locations with an operating temperature in excess
of -75° F or 180°F.