Use and Care Manual
Cleaning
Page 2 / 2
Care & Maintenance
Mix mild soap with warm of warm water, then wash the table frame using a soft cloth. Thoroughly rinse soap residue off the
table. Dry with a soft cloth. Do not use harsh chemicals or abrasive materials to clean the table.
DO NOT USE BLEACH DO NOT USE A PRESSURE WASHER
SAFE USE: Never sit or stand on the table.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
COVER: When not in use, covering the table with a breathable cover will help protect it from the harmful eects of
sunlight, dust build-up, and collecting debris.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move the table to a
cool, dry indoor location. Covering the table while in storage is recommended to help prevent dust build-up.
STEP 2
Slide the metal tube over the weight mounted driftbolt.
Slide the leg base onto the driftbolt, ensuring the notches
in the metal tube and leg base are aligned.
STEP 3
Ensure the notch in the metal tube and leg base are
aligned with the folding mechanism, as shown.
On the underside of the leg base, place the washer over
the threaded rod.
With the at side down, screw the M10 lock nut onto the
treaded rod. Securely fasten the lock nut with a wrench.
NOTE: The lock nut must be tightened with a wrench to
ensure functionality and stability of the table.
STEP 4
Secure the tabletop by inserting the pin into the folding
mechanism, as shown.
STEP 2
Flip the folding mechanism upright. Remove the lock nut
and washer from the threaded rod.
Slide the metal tube over the weight-mounted threaded
rod, ensuring the notch in the tube is aligned with the
backside of the folding mechanism.
Place the leg base onto the metal tube, ensuring
the notches align, as shown.
WARNING:
08/2020