Instructions / Assembly

ManualsBrandsSunnydaze Decor ManualsOutdoor Chaise LoungesSteel Outdoor Floating Chaise Lounge Chair with Polyester Beige Cushions and Canopy

1

2

3

4

5

PH004-3

ASSEMBLY

STEP 1

• Connect Lower Support Pole (A) to Back

Base (D) using M8x80 Bolt Set (U).

• Slide Front Base (C) through the loop on

Safety strap (Z), then into the lower support

pole, as shown.

• Align the holes of the front base and lower

support pole and secure with 2x M6x15

Bolt (Y), as shown.

STEP 2

• Place Upper Support Pole (B) onto the

lower support pole. Align the holes and

secure with M8x72 Bolt Set (V).

• Slide Umbrella Frame (L) onto the upper

support pole. Ensure the umbrella frame

is beyond the hole at the end of the upper

support pole and secure to the pole.

NOTE:

Avoid over-tightening the threaded knob

on the umbrella frame as it may damage the nish

of the stand.

STEP 3

• Insert Eye Bolt (AA) through the underside

of the hole on the uppers support pole.

• Secure the eye bolt using Nut Set (AB).

Page 3 / 63/2021