Owner's Manual
Grounding Instructions
Automatic Overheat Safety Control
This heater is equipped with an internal heat-limiting thermostat and overheat protection circuit. When a
potential overheat temperature is reached, the system will automatically shut the heater o. Unplug the heater
and allow it to cool down for at least 10 minutes before restarting.
Page 5 / 6
Make sure the heater is switched OFF before plugging the heater into
the outlet. Connect to properly grounded outlets only.
Note: The power cord has a polarized plug (with one blade wider than
the other) that will only t in a polarized outlet one way. If it does not
insert easily try reversing the plug. If it still does not t, contact a certied
electrician to replace the outlet.
DO NOT defeat the safety purpose of the polarized plug.
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER SERVICEABLE PARTS INSIDE
Do not use this appliance if any part of it has been underwater. Immediately call
electrical system which has been under water.
BG-E2A 12/2020