Use and Care Manual

ManualsBrandsSunnydaze Decor ManualsHeating & CoolingSunnydaze 40,000 BTU Forced Air Propane Heater- Overheat Auto-Shutoff

Purchase Date: / / Order/Customer Reference Number:

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:

customerservice@nethealthshops.com, or via our contact us page at https://tiny.cc/SunnydazeContact

PROPANE FORCED AIR HEATER

40,000 BTU

BAO-118

06/2020BGA1601-40K

READ INSTRUCTIONS CAREFULLY:

Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone

who has not read these instructions to assemble, light, adjust or operate the heater.

WARNING:





—

Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other appliance.

— Service must be performed by a qualied service agency.

This is an unvented portable heater. It uses air (oxygen) from the area in which it is used. Adequate combustion

and ventilation air must be provided. Refer to page 3.

Forced Air means that a blower or fan pushes the air through the heater. Proper combustion depends upon this

air ow; therefore, the heater must not be revised, modied or operated with parts removed or missing. Likewise,

safety systems must not be circumvented or modied in order to operate the heater.

ANSI Z83.7-2011 / CSA 2.14-2011

Page 1 / 11

Summary of content (11 pages)

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.
PAGE 2
IMPORTANT: Read and understand this manual before assembling, starting or servicing heater. Improper use of heater can cause serious injury. Keep this manual for future reference. GENERAL HAZARD WARNING: Failure to comply with the precautions and instructions provided with this heater, can result in death, serious bodily injury and property loss or damage from hazards of fire, explosion, burn, asphyxiation, carbon monoxide poisoning and/or electrical shock.
PAGE 3
SAFETY IMPORTANT SAFETY INFORMATION WARNING: Fire, burn, inhalation and explosion hazard. Keep solid combustibles, such as building materials, paper or cardboard, a safe distance away from the heater as recommended by the instructions. Never use the heater in spaces which do or may contain volatile or airborne combustibles or products such as gasoline, solvents, paint thinner, dust particles or unknown chemicals. WARNING: Not for home or recreational vehicle use.
PAGE 4
SAFETY PRODUCT IDENTIFICATION Continued 18. Keep children and animals away from the heater. 19. Check the hose before each use of the heater. If highly worn or cut, replace with a hose specified by manufacturer before using heater. 20. Locate the heater on stable and level surface if heater is hot or operating. 21. To prevent injury, wear gloves when handling heater. 22. Never attach duct work to the heater. 23. Do not alter the heater. Keep the heater in its original state. 24.
PAGE 5
PROPANE SUPPLY Propane gas and propane tank(s) are to be furnished by the user. Use this heater only with a propane vapor withdrawal supply system. The installer must conform with local codes or, in absence of local codes, with the Standard for the Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58 and Propane Gas Installation Code, CAN/CGA B149.1. The amount of propane gas ready for use from propane tanks varies. Two factors decide this amount: 1. The amount of propane gas in the tank(s) 2.
PAGE 6
VENTILATION WARNING: Provide proper fresh, outside air ventilation before running the heater. Provide at least a 1.5 ft2 (1400 cm2) opening of fresh, outside air while running the heater. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. OPERATION WARNING: Review and understand the warnings in the Safety section, page 3. They are needed to operate the heater safely. Follow all local codes when using this heater. TO START HEATER 6.
PAGE 7
OPERATION Continued TO STOP HEATER 1. Tightly close the propane supply valve on the propane tank(s). TO RESTART HEATER 1. Wait five minutes after stopping heater. 2. Wait a few seconds. The heater will burn gas remaining in the supply hose. 3. Store in dry, clean and safe place. Do not store hose/regulator assembly inside heater combustion chamber. 3. Unplug the heater power supply cord. 2. Repeat steps under To Start Heater, page 6. 4.
PAGE 8
SERVICE PROCEDURES WARNING: Never service the heater while it is plugged in, connected to propane supply, operating or hot. Severe burns and electrical shock can occur. ELECTRICAL SYSTEM The entire electrical system for this heater is contained within the motor. If any part of the electrical system is damaged, you must replace the motor. MOTOR Set Screw Screw Motor and Fan Guard Figure 7 - Set Screw Location Figure 6 - Removing Motor and Fan Guard from Heater Fan Guard 1.
PAGE 9
SERVICE PROCEDURES Continued FAN 1. Remove the three screws that attach the fan guard to the heater shell. 3. Use a nut-driver or standard screwdriver to remove the igniter mounting screw from the rear head (see Figure 11). 2. Remove the motor and fan guard from the heater shell (see Figure 6, page 8). Mounting Screw 3. Use a hex wrench to loosen the set screw, which holds the fan to motor shaft (see Figure 7, page 8). Remove fan, taking care not to damage the fan blade pitch.
PAGE 10
TROUBLESHOOTING WARNING: Never service the heater while it is plugged in, connected to propane supply, operating or hot. Severe burns and electrical shock can occur. OBSERVED FAULT Fan does not turn when the heater is plugged in POSSIBLE CAUSE No electrical power to heater Fan blades bent SOLUTION Check voltage to electrical outlet. If voltage is good, check heater power cord for breaks Replace fan.
PAGE 11
HEATER DIAGRAM AND PARTS LIST 2 1 3 4 5 6 7 8 9 10 11 12 13 14 15 23 22 21 20 17 18 19 No. Description 1 Outer Casing Qty. 1 2 Handle 1 3 Handle Cover 4 Inner Shell 5 16 No. Description 9 Gas Diffuser Qty. 1 No. Description 17 Power Cord Qty.