Instructions / Assembly

INSTALLATION INSTRUCTIONS
1. OUTLET BOX(Not include)
2. MOUNTING BRACKET
3. MOUNTING SCREWS
4. GREEN GROUNDINGD SCREW
5. FIXTURE MOUNTING SCREW
6. BLACK SUPPLY WIRE
7. WHITE SUPPLY WIRE
8. SUPPLY GROUND WIRE
9. FIXTURE BLACK WIRE
10. FIXTURE WHITE WIRE
11. FIXTURE GROUND WIRE
12. WIRE CONNECTORS
13. CANOPY
14. DECORATIVE NUT
ASSEMBLY AND INSTALLATION
1.Thread FIXTURE MOUNTING SCRES(5) into MOUNTING BRACK(2) and adjust it until it
produces 1/4” out from the CANOPY(13).
2. Pull the power supply wires out from the OUTLET BOX (1) carefully, and mount the
MOUNTING BRACKET (2) to the OUTLET BOX (1)by using MOUNTING SCREWS (3).
3. Connect BLACK SUPPLY WIRE (6) to FIXTURE BLACK WIRE (9), connect WHITE SUPPLY
WIRE (7) to FIXTURE WHITE WIRE (10) and connect SUPPLY GROUND WIRE (8) to
FIXTURE GROUND WIRE (11) using a WIRE CONNECTORS (12). And wrap all wire
connectors with electrical tape for a more secure connection.
4. Partially thread GREEN GROUNDING SCREW (4) into side hole of MOUNTING BRACKET
(2).Wrap grounding wire from fixture around green grounding screw stem and leave enough
excess wire.
5. Place the CANOPY (13) over back onto the FIXTURE MOUNTING SCREWS (5), and secure
it into place by using the DECORATIVE NUTS (14). And tighten to secure the fixture to the
ceiling.
Please read carefully and save these instructions, as you may need them at a
later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in order to
prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical
Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring
connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no
parts are missing by referencing the illustrations on the installation instructions.