Instructions / Assembly

2
1
2
WARRANTy
This product is covered under a one year limited warranty. Sunforce Products Inc. warrants to the original
purchaser that this product is free from defects in materials and workmanship for the period of one year from date
of purchase. The included batteries are not covered under this warranty.
Proof of purchase including date, and explanation of complaint is required for warranty service.
• Your motion light is not a toy. Keep it out of reach of small children.
• Your motion light and solar panel are both weather-resistant.
• You can mount your motion light indoors, but your solar panel must be installed outdoors to receive light from
the sun.
• If using a step ladder, you may require a second person to help install the solar motion light.
• Prior to installation, lay out all components to ensure they correspond to the parts diagram on the cover page.
• Never look directly into the solar motion light when illuminated.
• From time to time, ensure the plug between the solar panel and light is securely connected.
• It is advisable to adjust the angle of the solar panel to optimize the exposure of the sun during the winter months.
• The solar panel should be cleaned with a damp cotton cloth on a regular basis. This will ensure optimal
performance and battery charging. Periodically, utilize the same technique to clean the lens of the motion light.
• Never let any abrasive material come into contact with the solar panel.
• 120 white LEDs
• Solar panel with 4.5 m / 15 ft wire
• Adjustable motion sensor
• Adjustable time and distance settings
PROdUcT feATUReS
cARe & MAINTeNANce
Ensure your solar panel is placed so that
its exposure to the sun is optimized. Be
aware of objects such as trees or property
overhangs that may impede the panel’s
ability to generate a charge.
Optional: Use a power drill (not included) to
create the holes on your chosen mounting
surface.
Use 4 of the included wall plugs and
screws to fasten the solar panel to the
surface.
INSTALLATION
Remove the mounting bracket from the
solar motion light by unscrewing the side
bolts.
Reattach the mounting bracket to the light
and tighten the side bolts (refer to the
illustration in Step 3).
Optional: Use a power drill (not included) to
create the holes on your chosen mounting
surface.
Fasten the mounting bracket to your
chosen surface with the 2 remaining wall
plugs and screws.
4
5
3
SAfeTy INfORMATION
When replacing the batteries, be sure to:
• Use rechargeable batteries only.
• Match the replacement battery specications with the batteries that have been removed.
• Observe the correct polarity (+ and -) when installing the replacement batteries.
• Replace the whole set of batteries at one time. Do not combine old and new batteries together
or those with different specications.
BATTeRy RePLAceMeNT INSTRUcTIONS