Manual

User’s Manual
Congratulations on your Sunforce Products purchase. This product is designed to the highest technical specifications and
standards. It will supply years of maintenance free use. Please read these instructions thoroughly prior to installation, then
store in a safe place for future reference. If at any time you are unclear about this product, or require further assistance
please do not hesitate to contact our trained professionals operating the customer support line 1-888-478-6435 or email
to
[e-mail].
This manual covers:
5 Watt Solar 12 Volt Battery Trickle Charger
7 Watt Solar 12 Volt Battery Trickle Charger
What’s included: 3 feet of wire connected to the solar panel, 12 Volt DC plug, battery clamps and mounting hardware
Power Rating:
Maximum rating 5 Watts (under ideal conditions)
Current: 333 mA @ 15 Volts
Maximum rating 7 Watts (under ideal conditions)
Current: 466 mA @ 15 Volts
Features:
• Quickly connects and disconnects to the battery
• Does not need direct sunlight; amorphous solar panel will work in cloudy conditions
• Weatherproof design
• Durable – covered by a five year warranty.
• Maintenance free
Operating Instructions
Securely place the solar panel in the sun. Utilize the included mounting hardware to attach the panel to the chosen
surface (an illustration of this procedure can be found with the brackets).
For optimal power, ensure the panel is directly facing the sun.
WARNING:
• Follow the below instructions carefully to not cause any bodily harm
• Correct polarity must be observed for product to function properly and safely
• Risk of fire, electric shock, and injury to persons if operating instructions are not followed
• Any misuse or tampering of the product and/or any included accessories will void warranty and may cause bodily
harm
• Follow all safety instructions provided by the battery manufacturer when handling 12V batteries. Always wear
safety glasses. Keep sparks, flames and cigarettes away from batteries at all times.
Installation:
Utilize the included mounting hardware to attach the panel to the chosen surface (a description of this procedure can be
found with the brackets). Your Solar 12 Volt Battery Trickle Charger can be installed using either the 12 volt DC plug or
battery clamps.
(1)
Installation through 12 Volt DC Plug:
Plug the 12 volt DC plug into the 12 volt DC socket in the vehicle. Make sure both ends are secure and aligned correctly.
For optimal power, ensure the panel is directly facing the sun.
The 12 volt socket in the vehicle must remain live when the ignition is in the “off” position for the solar panel to charge.
This can be checked in your vehicle owner’s manual or through your vehicles local dealership.