Instructions / Assembly

ManualsBrandsSunex ManualsTool Carts23 in. 2-Drawer Slide Top Utility Cart in Black

8035 & 8035R 1 06/11/18

Examine box contents, then proceed with the following instructions.

Drawer

Assembly

Barrel Keys

Locking

Casters (2)

Fixed

Wheels (2)

Push Handle (1)

EVA Liners (4) Rubber Mats (2)

TOOLS NEEDED

Phillips

Screwdriver

13mm

Wrench

2 People

Legs (4)

Tabletop or

workbench*

Bottom Tray

M8 x 16

(16 pcs.)

M8 x 16

(32 pcs.)

M8 x 20

(4 pcs.)

M8 Nut

(16 pcs.)

M8 Washer

(64 pcs.)

WARNINGS, ASSEMBLY INSTRUCTIONS & PARTS BREAKDOWN

PARTS LIST

Read and follow all instructions in User's Manual. It is the responsibility of the owner to make sure all personnel

read this manual prior to using the device. It is also the responsibility of the device owner to keep this manual intact

and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact

Sunex Tools

for replacements. If the operator is not ﬂuent in English, the product and safety instructions shall be

read and discussed with the operator in the operator's native language by the purchaser/owner or his designee,

making sure that the operator comprehends its contents.

Read and follow all instructions in User's Manual. • Do not load carts beyond

rated capacity (450 lbs.) • Lock lid and drawers before moving. • Apply brake

on locking casters anytime cart is in place. • Units can tip or fall causing

damage or personal injury. • Cart is designed to roll easily on ﬂat surfaces

and should not be used on uneven or inclined surfaces. • Do not open more

than one loaded drawer at a time. •Do not stand on or step in drawers. • Keep

children away from unit. • Wear gloves when lifting edges. • Failure to heed

these warnings may result in personal injury and/or property damage.

WARNING

MODEL 8035 / 8035R

SLIDE TOP UTILITY CART

WARNING: This product can expose you to chemicals including nickel, which

is known to the State of California to cause cancer and birth defects or other

reproductive harm. For more information go to www.P65Warnings.ca.gov.

Summary of content (9 pages)

PAGE 1
MODEL 8035 / 8035R SLIDE TOP UTILITY CART WARNINGS, ASSEMBLY INSTRUCTIONS & PARTS BREAKDOWN Read and follow all instructions in User's Manual. It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact Sunex Tools® for replacements.
PAGE 2
ASSEMBLY INSTRUCTIONS Step 1: Assembly Preparation 2. Remove all contents from box. Reference the parts list to make sure you have all the parts. CAUTION NOTE Verify your tabletop or workbench can support 150 lbs. (68 kg.). Failure to follow this warning could result in damage to property or personal injury. 2.a. Cover table or workbench to prevent any damage to surface. Step 2: Attaching Casters Turn bottom tray (#7) upside down.
PAGE 3
ASSEMBLY INSTRUCTIONS Step 5: Attaching the Handle 6. 5. Attach the handle (#11) using the 4 M8x20 handle bolts. NOTE: The handle should be assembled on the same side as the locking casters (#9). Step 6: The cart is complete.
PAGE 4
MODELO 8035 / 8035R CARRITO DE SERVICIO DE TAPA DESLIZADORA DESGLOSE DE PARTES & MANUAL DE OPERACIÓN Lea y comprenda todas las instrucciones. Hacer caso omiso al seguir todas las instrucciones alistadas a continuación podría ocasionar el choque eléctrico, incendio, explosiones y/o lesiones personales serias. Es las responsabilidad del propietario asegurarse que todo el personal lea este manual previo al uso de este dispositivo.
PAGE 5
INSTRUCCIONES DE ENSAMBLADO Paso 1: Preparación del ensamblado 2. Saque todo el contenido de la caja. Consulte la lista de partes para asegurar que usted cuente con todas las partes. CAUTION NOTE Verifique que su tablero o banco de trabajo pueda soportar 150 lbs. (68 kg.). Hacer caso omiso a esta advertencia podría ocasionar daños a la propiedad o lesiones personales. 2.a. Cubra la mesa o banco de trabajo para prevenir cualquier daño a la superficie.
PAGE 6
INSTRUCCIONES DE ENSAMBLADO Paso 5: Sujeción del mango 6. 5. Sujete el mango (#11) usando los pernos de mango 4 M8x20. NOTA: El mango debe ensamblarse del mismo lado que él de las ruedecillas de cierre (#9). Paso 6: El carrito está completado.
PAGE 7
MODÈLE 8035 / 8035R CHARIOT À TABLETTES AVEC COUVERCLE COULISSANT VUE ÉCLATÉE DES PIÈCES ET MODE D’EMPLOI Veuillez lire et bien comprendre toutes les instructions. Tout manquement aux instructions indiquées ci-après pourrait entraîner un choc électrique, un incendie, une explosion et/ou des blessures personnelles graves. Il est de la responsabilité du propriétaire de s'assurer que tout le personnel lise ce manuel avant d'utiliser l'appareil.
PAGE 8
INSTRUCTIONS DE MONTAGE Étape 1 : Montage 2. Retirez tout le contenu de la boîte. Référez-vous à la liste des pièces afin de vous assurer d’avoir toutes les pièces. ATTENTION REMARQUE Assurez-vous que le dessus de votre table de travail ou de votre établi puisse bien supporter 150 lb (68 kg). Le manque à observer cette consigne peut causer des dommages matériels ou des blessures corporelles. 2.a. Couvrez la table ou l’établi pour empêcher tout dommage à la surface.
PAGE 9
INSTRUCTIONS DE MONTAGE Étape 5 : Fixation de la poignée 5. 6. Fixez la poignée (no 11) en utilisant les 4 boulons de poignée M8x20. REMARQUE : La poignée devrait être assemblée du même côté que les roulettes de verrouillage (no 9). Étape 6 : Le chariot est complété.