User Manual

Assembly

Getting Started

1. Remove the snow thrower and all other items from

the box.

2. Determine the left and right hand side of the snow thrower

by standing in the normal operating position.

3. Check all items for shipping damage. If damage is found

or suspected or if any of the parts are missing, do not

assemble. Instead, promptly inform the dealer where you

bought the snow thrower or contact the Snow Joe

Sun Joe

customer service center for assistance.

4. Check to make sure the upper chute crank is included.

Upper, Middle + Lower Frame Assembly

1. For easy assembly, the unit comes complete with

most parts already connected. To complete the handle

assembly, simply pull the middle frame back and pull the

upper frame up (Fig. 2).

2. Secure the connection of the lower frame to the middle

frame by fastening the rst set of joint xing T-bolts and

knobs on each side (Fig. 3).

3. Secure the connection of the middle frame to the upper

frame by fastening the second set of joint xing T-bolts

and knobs on each side (Fig. 4).

Discharge Chute Assembly

1. Loosen the knob to lift the chute deector (Fig. 5).

2. Lift the chute deector and lock it securely onto the

discharge chute (Fig. 6).

m CAUTION m

Inspect wiring, which, if damaged during shipping,

may cause serious bodily injury during equipment use.

If any damage is seen or suspected, do not assemble.

Instead, contact the Snow Joe

+ Sun Joe

customer

service center at 1-866-SNOWJOE (1-866-766-9563)

for assistance.

Handle with care during assembly so that electrical

wiring does not become damaged.

Fig. 2

Fig. 3

Fig. 4

Fig. 5