Use and Care Manual

Features
Safety Lock-off Button (A): Used to engage the switch
Switch Lever (B): Used to start and stop the mower
Grassbox (C): Used to collect mowed clippings.
Operation
After conducting all safety checks and necessary preparations,
follow these steps to operate the mower:
1. Push the loop of the electric extension cord through the
slot from the opposite side of the restraint hook. Position
the loop over the hook and pull the cable back through the
slot.
Note: Use a waterproof electrical extension cord rated
14AWG. H05VV-F and H05RN-F in US.
2. Place the bulk of the extension cord on the lawn close to
the starting point.
Note: The directional method of operation is
recommended to obtain the maximum cutting
performance and reduce the risk of the electrical
extension cord entering the cutting path.
3. Hold the handle assembly with both hands.
4. Tilt the handle downwards to slightly raise the front of
the mower. This will reduce the risk of lawn damage
during start-up.
Figure 9
A
B
A. Safety lock-off button B. Switch lever
START
STOP
C
Figure 10
C. Grass box
Figure 11
B
A. Cable relief B. Extension cord
A
4
1
3
Figure 12
2
8