Replacement Part List

6
Unpacking
Carton Contents
• Electric lawn mower
• Grass bag
• Grass bag support rod
• Upper handle
• Upper handle knob and bolt assembly (2)
• Lower handle
• Lower handle screws (2)
• Cable relief holder
• Cable clip (2)
• Spanner
• Manual
1. Carefully remove the lawn mower and check to see that all
of the above items are supplied.
2. Inspect the product carefully to make sure no breakage
or damage occurred during shipping. If you nd damaged
or missing parts, DO NOT return the unit to the store.
Please call the Snow Joe
®
+ Sun Joe
®
customer service
department at 1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric lawn
mower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
Assembly
NOTE: Before using the mower, follow these instructions to
assemble the handle and grass bag.
Handle Assembly
1. Fit the lower handle into the two holes in the machine
body and fasten the handle on both sides with the screws
provided (Fig. 1).
2. Slide the cable relief holder onto the upper handle (Fig. 2).
3. Join the upper handle to the lower handle using the knob,
plastic washer and bolt provided (Fig. 3). Repeat on the
opposite side.
m CAUTION! m
Inspect wiring, which, if damaged during shipping, may
cause serious bodily injury during equipment use. If any
damage is seen or suspected, do not assemble. Instead,
contact Snow Joe
®
+ Sun Joe
®
customer service
1-866-SNOWJOE (1-866-766-9563) for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.
Fig. 1
Machine body
Lower handle
Screw
Fig. 2
Upper handle
Cable relief
holder
Fig. 3
Upper handle
Plastic washer
Knob
Bolt