User Manual

4
page
No picture or sound on TV • Make sure the TV is turned on
• Make sure the AC Adapters are plugged in
• Make sure the outlets are working
• Make sure the Camera and TV are set to the same channel
(try using the other channel if necessary)
• Make sure the antenna on the TV is fully extended
Sound but no picture on TV • Press the Quick View Button ("Video ON/OFF") once to turn on video mode
• Try adjusting the Brightness, Contrast and Vertical Hold dials on the TV
• Test reception by moving the TV and/or Camera to different locations
• Make sure the Camera and TV are set to the same channel
(try using the other channel if necessary)
• Make sure the antenna on the TV is fully extended
Picture but no sound • Turn up the volume on the TV using the Volume Dial
• Make sure the Camera and TV are set on the same channel
(try using the other channel if necessary)
• Make sure the antenna on the TV is fully extended
Picture not clear • Make sure the Camera and TV are set on the same channel
(try using the other channel if necessary)
• Position the TV closer to the camera if necessary
• Move TV away from other monitors, cordless phones, walk-talkies, etc.
• Try adjusting the Brightness, Contrast and Vertical Hold dials on the TV
• Test reception by moving the TV and/or Camera to different locations
• Make sure the antenna on the TV is fully extended
Squealing sound • Move the Camera and the TV further away from each other
PROBLEM SOLVING:
Problem Solution
02010
Please read the following instructions carefully.
Keep this instruction manual for future reference.
Phillips head screwdriver (not included).
Keep small parts away from children.
INSTRUCTION MANUAL
BABY SOUNDS
VIDEO MONITOR
Thank you for buying the 900 MHz
Baby Sounds Video Monitor from Summer
Infant. Now you can hear and see your baby!
Ideal for older children too – monitor
playroom activities!
QUICK SET UP:
Read the instruction manual for more detailed instructions
and explanations.
• Place Camera in nursery and position facing crib (do not place
in crib or within child’s reach). Tilt the Multi-Position Camera/
Microphone so it is facing baby as much as possible.
• Plug small AC Adapter into Camera’s AC Adapter Jack and other
end of cord into a standard electrical outlet.
• Turn Camera on and select channel by setting the Channel
Selector (A/Off/B) to channel A.
• Position TV in the room from which you will monitor baby.
Plug large AC Adapter into TV’s AC Adapter Jack and plug the
other end into a standard electrical outlet. Fully extend the
TV’s antenna.
• Turn TV on using Power On/Volume Dial. Set Channel Selector
to channel A. You should now be able to see a view of the
nursery and hear any sounds in the nursery. If you don’t get a
picture, press the Quick View Button.
• If the picture is not clear, try switching both the Camera and
the TV to channel B. Sometimes a slight adjustment to the
Camera, TV and antenna can make a significant difference
in reception.
• Adjust the volume on the TV as needed.
SATISFACTION GUARANTEED: IF YOU
ARE NOT COMPLETELY SATISFIED WITH
THIS PRODUCT PLEASE RETURN IT TO US
WITH PROOF OF PURCHASE. IF YOU
HAVE ANY QUESTIONS OR COMMENTS,
PLEASE CONTACT OUR CONSUMER
RELATIONS DEPARTMENT.
© 2001 Summer Infant, Inc.
6 Blackstone Valley Place
Suite 206A
Lincoln, RI 02865 USA
1-800-268-6237
www.summerinfant.com
MADE IN CHINA.
Colors and styles may vary.
If you experience a problem that is not noted in this manual, please do not return the product to the store. Our Customer Relations
Department may have a simple solution to your problem. Please contact us 1-800-268-6237.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by Summer Infant may void the users authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Consult the dealer or an experienced radio/TV technician for help
2
1
3