Version:V 1.
THANK YOU Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our sincere hope that you are completely satisfied with your new purchase. All SUMERAIN products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions.
LIMITED LIFETIME CONSUMER WARRANTY VERSION: 20220820.15.1 This product has been manufactured and tested to the highest quality standards by SUMERAIN sanitary Inc("SUMERAIN").This warranty is limited to SUMERAIN products which are purchased by a consumer in the China after Jan 1,2010 and installed in China or the state which has SUMERAIN technical support department locally.(visit http://www.sumerain.com/en/supportcenter.asp for review the state list of SUMERAIN technical support department).
FUNCTIONS AND SPECIFICATION Function Bathroom Sink Faucets Feature Wall mount, Left-hand operating Theme Modern ,Contemporary Configuration Vessel Finish Chrome/Brushed Nickel/Oil rubber Bronze /Matte Black /Brushed Gold Installation Holes Two Number of Handles One Handle style Lever Faucet Total Height Adjustable Spout Reach 204mm [8.
DEMENSION FRONT VIEW OF FAUCET RIGHT SIDE VIEW OF FAUCET
INSTALLATION STEPS 1. BEFORE PROCEEDING WARNING: Read all the instructions completely before proceeding.SUMERAIN recommends calling a professional if you are uncertain about installing this product!, this product should be installed in accordance with all local and state plumbing and building codes. 2. SHUT OFF WATER SUPPLY Locate water supply inlets and shut off the water supply valves. These are usually found near the water meter.
4. VALVE TRIM SET INSTALLATION 4.1 Make a mounting rack (normally use woods as materials) for preparing install the rough-in valve. The mounting rack’s face should be 50mm (1-15/16”) at least and 74mm (2-29/32”) behind the finish wall surface.
4.2 Secure the rough-in valve to the mounting rack with screws (screws not including) 4.3 Turn on your shut-off valve for cleaning the hot and cold water supply tube before connect to the valve trim, allow the water flush 3~5 minutes to flush out dirt and debris. Shut off the water supply again after finish.
4.4 Apply Teflon tape on the thread of supply tube outlet and then connect to rough-in valve with elbow. Rough-in Valve thread for Hot&Cold water inlet: NPT 1/2-14[US,UA] G1/2” [UK ,EU ect.] 4.5 Install the finished wall.
4.6 Apply Teflon tape on the thread of spout inlet and then connect to rough-in valve. 4.7 Attach the escutcheon to spout.
4.8 Slide the escutcheon over the sleeve and attached to the finished wall. 4.9 Place handle onto the valve stem and tighten set screws by using the Allen wrench that is provided.(Please don’t over tighten), Then attach the screw cover onto handle.
ASSEMBLE FINISHED 5. INSPECTION 5.1 Turn on hold and cold water supply and check all connection for ensuring no leaking anywhere. 6. FUNCTION INSPECTION 6.1 Turn on the handle, the water outflow from the spout and then turn off the handle, the water stop out flowing.
6.2 Turn right the handle, the cold water coming, on the contrary way, turn left the handle, hot water coming.
CLEARNING RECOMMENDATION FOR SUMERAIN PRODUCTS Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
